Author Topic: Heli question for Klaus  (Read 30853 times)

spirit_66

  • Member
  • ***
  • Posts: 111
Re: Heli question for Klaus
« Reply #30 on: June 14, 2013, 12:20:27 PM »
Hi Klaus,

thanks for the quick response. Well, that's no problem for me. I was just curious if you used it with HTR and which profile.
Are you using the Cera Bell 222B with HTR? There're are 2 profiles available.
Have a nice weekend.

Gruesse
Rudi
Regards from Chiang Mai (VTCC) / Thailand

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Re: Heli question for Klaus
« Reply #31 on: June 16, 2013, 11:40:25 AM »
Hi Rudi,
I use the Cera Bell222 with the updated config files from hovecontrol.
Jordan Moore did some cjanges with the flight Dynamics and provided them for the community as download.

Link:
http://www.hovercontrol.com/cgi-bin/ifolio/imageFolio.cgi?direct=FSX_Helicopter_Configs&img=9

Actually, I only fly the Cera 412 and 212 with HTR profiles. These profiles were first introduced by Fred Naar, the author of HTR.

Beste Gruesse, Klaus



P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

spirit_66

  • Member
  • ***
  • Posts: 111
Re: Heli question for Klaus
« Reply #32 on: June 16, 2013, 08:41:59 PM »
Hi Klaus,

thanks for the link to get the improved Bell 222B aircraft files. I'll give it a try.

I'm doing my own Bell 222B HTR profile now. It's quite interesting and fun to work with this. I guess that I can make a better one as it is available at hovercontrol. The actual results are very promising.

Maybe I'm in the mood to make also a profile for the EC-135. The most work is to get the original specifications and a good blueprint of the helicopter.

Gruesse aus Chiang Mai
Rudi
Regards from Chiang Mai (VTCC) / Thailand