Misty's Caribbean Air Adventures (MCA) Version 2
Updated Dropbox File Links (6/9/2020)
NOTE: Previous Installation:
If you've previously installed the Gregory Goodwin Bahamas and Misty's Caribbean Air Adventures collection, the base scenery by Gregory has been updated as well as the Bahamas scenery for Misty's Caribbean Air. You'll need to download at least those two files below to be updated to version 2 for this project. (Step #1 and Step #2) Just download, unzip, then overwrite your previous files with the updated files.
You will NOT need to download the custom objects for the Bahamas or the custom objects for Return to Misty Moorings IF you've already installed them inside your simulator. (Step #3 and Step #4) Same goes for the optional files (Step #5 and Step #6)
NOTE: New Installation:
Follow Required Steps #1-#4 (* See Step #4 installation note below)
======
Installation
The files located at the dropbox links below are created for the Misty's Caribbean Air Adventures collection of scenery and enhancements. They are meant to be used with an amazing base scenery of the Bahamas by Gregory Goodwin. Gregory has created a highly accurate representation of this area of the Bahamas with custom waterclass, landclass and vector data. It covers the following island areas of the Bahamas. Andros, Bimini, Nassau, Grand Bahama, The Abacos, The Berry Islands, Eleuthera, Cat Island, The Exumas and Ragged Islands as well as the Turks and Caicos Islands.
It's a large area of the Caribbean Sea that focuses on the Northern, Western and some of the Eastern and Southern Bahamas islands. He's planning on completing the rest of the Bahamas in a future release that will cover all of the remaining east and southern chains.
======
Step #1. Install the base Bahamas scenery by Gregory Goodwin.
You can find his base file named bahamas_scenery_pack_3-1.zip by going to this dropbox link:
https://www.dropbox.com/s/gjsbz7qodn05bf7/bahamas_scenery_pack_3-1.zip?dl=0Or by searching on AVSIM's file library: Search using "Gregory Goodwin", "Northern Bahamas" or "bahamas_scenery_pack_3-1.zip"
Start with that file, install it in your simulator and activate in your library as normal for any addon scenery. Follow all of his included instructions for proper installation please.
======
To view the enhancements for the Misty's Caribbean Air Adventures, Please install the following required files:
Step #2. MCA North Bahamas Scenery files by Brad Allen (Version 2)
https://www.dropbox.com/s/vy2ozx50egwqas5/Misty%27s%20Caribbean%20Air%20Bahamas%20Scenery%20v2.zip?dl=0======
Step #3. MCA Custom Object Files by Steve Weinkamer.
Install the contents of each of the three zipfiles below containing custom Bahamas objects used in this project.
FSXP3D Misty's Caribbean_SW
https://www.dropbox.com/s/w6rmlyznupgcr4g/FSXP3D%20Misty%27s%20Caribbean_SW.zip?dl=0FSXP3D Misty's Caribbean_SW vol 2
https://www.dropbox.com/s/7p01ke3famdje5e/FSXP3D%20Misty%27s%20Caribbean_SW%20vol%202.zip?dl=0FSXP3D MoCat's Caribbean Seaplanes Tours Object Library
https://www.dropbox.com/s/2jwocbevewvsqw2/FSXP3D%20MoCat%27s%20Caribbean%20Seaplanes%20Tours%20Object%20Library.zip?dl=0======
Step #4. *Install the four main Return to Misty Moorings Object Libraries found here:
https://www.return.mistymoorings.com/object_libraries_build/(* This step can be skipped if you have already downloaded and installed the four main libraries for Return to Misty Moorings.)
Scroll down to the Object Library Table area and the download links are located below. You'll need to download and install four custom object library zipfiles. Part I, Part II, Part III and Part IV. Unzip one at a time and carefully follow the instructions for that specific libraries installation. When completed, you must then activate each of the four libraries inside your simulators scenery library.
======
Step #5. Install the Snow Dog Tours Object Libraries.
Step #. Optional enhancements by Dexter Thomas and Brad Allen.
Dex has created AI Floatplane and Fishing Boats Traffic, sounds. Brad created custom scenery for the floatplane bases these AI objects visit.
NOTE: You'll need an installation of Tongass Fjords X to see the AI floatplanes and fishing vessels in action. If not, you can still install the scenery inside this zip for the floatplane bases.
AI Seaplane and Fishing Vessels Traffic, Sounds and Effects by Dexter Thomas. AI Seaplane Bases Scenery by Brad Allen.
https://www.dropbox.com/s/5fil3bydmve6sf0/Misty%27s%20Caribbean%20Air%20Seaplane%20Bases%20Scenery_Effects_Sounds_Traffic.zip?dl=0Step #6. Optional MCA Custom Aircraft Repaint files by Klaus Troeppner. Klaus created some great looking paint schemes in Misty's Caribbean Air Adventures colors. There's a default Maule M7 repaint as well as three payware models that will show these repaints in the simulator. You must own those payware models to see the custom paint schemes.
Carenado Cessna 185
https://www.dropbox.com/s/go0lvd53lk66fwj/Misty%27s%20Caribbean%20Air%20Carenado%20C185.zip?dl=0Default FSX/P3D Maule M7
https://www.dropbox.com/s/3ien3yxyhokxuxk/Misty%27s%20Caribbean%20Air%20Maule%20M7.zip?dl=0Milviz Bell 407 Helicopter
https://www.dropbox.com/s/toqstyqen5enh5r/Misty%27s%20Caribbean%20Air%20Milviz%20Bell%20407.zip?dl=0Tongass Fjords X DHC2 AI Aircraft
https://www.dropbox.com/s/szed5tr9elj8ogl/Misty%27s%20Caribbean%20Air%20DHC2%20Beaver%20AI%20Aircraft.zip?dl=0Hope you like this project and please share your thoughts here on our forum. Time to go swimming with some piggies!!
Brad