Author Topic: Fairbanks BWEP Seaplane Hangers  (Read 5077 times)

xxd09

  • Member
  • ***
  • Posts: 347
Fairbanks BWEP Seaplane Hangers
« on: July 05, 2019, 07:42:30 PM »
Can someone tell me which Object file puts Seaplane Hangers at Fairbanks Intl
I have BWEP Fairbanks Seaplanes installed
I have SAK Seaplane Bases installed
I am sure they are BWEP hangers
Is there a slider I should move further right?
xxd09

ualani

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 1,739
  • Legacy RTMM Library Manager
Re: Fairbanks BWEP Seaplane Hangers
« Reply #1 on: July 06, 2019, 08:21:32 AM »
Not sure what you're asking for. Do you see the hangars, or wondering if you are missing them? Are you asking what the particular object name(s) are?

Unless you presently have your sliders set way to the left, moving them farther right will make no difference as to whether or not objects will display. AS far as I'm aware, all objects used by RTMM are designed to display when sliders at set to normal, which is centered, or even left of center.

Steve
Legacy RTMM Library Manager
Custom Objects Design
Legacy Scenery Design
Support


xxd09

  • Member
  • ***
  • Posts: 347
Re: Fairbanks BWEP Seaplane Hangers
« Reply #2 on: July 06, 2019, 11:04:07 AM »
I used to have them but they seem to have disappeared!
xxd09

ualani

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 1,739
  • Legacy RTMM Library Manager
Re: Fairbanks BWEP Seaplane Hangers
« Reply #3 on: July 06, 2019, 11:36:56 AM »
It's probably an oversight on my part, but where is the file to download for BWEP Fairbanks Seaplane Bases?

Also, do you have the must current version of Fairbanks International that you are referring to? Are you using the Aerosoft version of Fairbanks? Just trying to get as much possible info as possible.

Screenshots and coordinates of the location where you saw them before would also be helpful.

Steve
Legacy RTMM Library Manager
Custom Objects Design
Legacy Scenery Design
Support


xxd09

  • Member
  • ***
  • Posts: 347
Re: Fairbanks BWEP Seaplane Hangers
« Reply #4 on: July 07, 2019, 04:23:28 AM »
I downloaded Fairbanks FloatPlanes from BWEP area
SAK Seaplane Bases v2.1 from Scenery area
Sim-Wings Fairbanks Professional from simMarket v1.11
This an updated version of a previous installation
Sheds/Hangers used to appear at N 69.49.42 W 147.50.25
xxd09

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Fairbanks BWEP Seaplane Hangers
« Reply #5 on: July 07, 2019, 09:00:23 AM »
Make sure the Fairbanks scenery is below BWEP scenery in your scenery library.  Then the BWEP scenery can load "on top of" it. 

Could you post a pic of the area?

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

ualani

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 1,739
  • Legacy RTMM Library Manager
Re: Fairbanks BWEP Seaplane Hangers
« Reply #6 on: July 07, 2019, 11:20:00 AM »
Also be aware that RTMM doesn't support Sim-Wings Fairbanks Professional, and our scenery probably won't appear properly there. The scenery wasn't created using that version of Fairbanks. That may also be a reason that you aren't seeing the hangars because they could be below the terrain or obscured by something else in your version.

I also found the Fairbanks Float planes package, and it was right in front of my eyes on the BWEP page!

Steve
« Last Edit: July 07, 2019, 11:22:54 AM by ualani »
Legacy RTMM Library Manager
Custom Objects Design
Legacy Scenery Design
Support


xxd09

  • Member
  • ***
  • Posts: 347
Re: Fairbanks BWEP Seaplane Hangers
« Reply #7 on: July 07, 2019, 02:53:06 PM »
I thought that might be the explanation
Thanks for all your advice
xxd09