Author Topic: 3D Redux Lights Goose 21A  (Read 254 times)

Garry

  • Misty Moorings Team
  • Member
  • *
  • Posts: 190
    • View Profile
3D Redux Lights Goose 21A
« on: June 19, 2019, 08:15:47 AM »
Hello
Does anyone have a config for the 3D lights for OZx modded Goose, please.

I've setup my Goose but I'm having trouble with the green nav light. I've set up the red light OK but when I copy the details and make the required value positive it's not showing. I've tried different settings to try to move the light forward so I can see it, from 0.9 to 1.9, 2.9 and 3.9, but nothing is happening. See pic: the red light is bright but the green is not.
I'm also not sure if the 22 and 45 deg lights are working either.
If I rem out all the landing lights they still show.
I think I'm using the correct aircraft.cfg, it's G21A Oz Team.

My entry:

LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi
light.0=3, 0.9, -24.9, 4.6, fx_shockwave_navred
light.1=3, 0.9, 24.9, 4.6, fx_shockwave_navgre
light.2=1, -15.8, -0.26, 4.6, fx_shockwave_beacon_rotating_red
light.3=2, -25.5, 0.00, 11.29, fx_shockwave_strobe_lowl
light.5=6, -0.1, 13.5, 4.5, fx_shockwave_landing_light_narrow_no_flare
light.6=6, -0.1, -13.5, 4.5, fx_shockwave_landing_light_narrow_no_flare
light.7=5, -3.5, -12.5, 3.5, fx_shockwave_landing_light
light.8=4, 1.60, 0.00, 2.70, fx_vclight,
light.9=3, -28.3, 0, 4.7, fx_shockwave_navwhi_l_old
light.10 = 5, -3.5, -12.5, 3.5, fx_shockwave_landing_light_narrow_down_22
light.11 = 5, -3.5, -12.5, 3.5, fx_shockwave_landing_light_narrow_down_45

Thanks
Josh


P3Dv4.5;R7 1700X o/c 4GHz;RX580 8Gb;16Gb 2666Hz RAM; Corsair 110h;34" UW monitor;120Gb SSD-OS;1Tb SSD-P3D + 3 HDD;Cambridge 2.1 audio; ASUS XONAR DX;CH Yoke;TMpedals;mytraffic06a;REXWWA,TD,SF,EF;WL2;FSXWX;3D Redux;Plan G;NextGenMesh

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,631
  • Troubleshooting
    • View Profile
Re: 3D Redux Lights Goose 21A
« Reply #1 on: June 19, 2019, 08:31:02 PM »
Here are my Goose lights.

Quote
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
//light.0 = 2, 1.2, 25.1, 4.5, fx_shockwave_strobe
light.1 = 1, -15.6, -0.26, 4.4, fx_shockwave_beaconh ,
light.2 = 4, 1.60, 0.00, 2.70, fx_shockwave_vclight,
light.3 = 5, -3.6, -12.1, 3.5, fx_Shockwave_landing_light_tail // Shockwave light
light.4 = 5, -1.2, 13.6, 4.6, fx_Shockwave_landing_light_short
light.5 = 5, -1.2, -13.6, 4.6, fx_Shockwave_landing_light_short

I snapped this just as the beacon and strobe flashed.   :o 8)


Floats down, showing a navlight on it.  They are part of the floats (not the wings), and not included in the lights section since they move with the floats.  ;)  Notice that I don't have navgre or navred in my [Lights] section.  But they show on my plane's floats.    8)
« Last Edit: June 19, 2019, 09:22:41 PM by jeff3163 »

Win10Pro64, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, NVidia GTX 1080 Ti, 1T/1T SSD's for Sims/OS, 3x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

Garry

  • Misty Moorings Team
  • Member
  • *
  • Posts: 190
    • View Profile
Re: 3D Redux Lights Goose 21A
« Reply #2 on: June 19, 2019, 11:38:18 PM »
Thanks Jeff.
Bang on the money as usual. 8)

The info re the floats resolved a lot of my questions.

However, it does seem that I may have a problem because the starboard float light is not showing..
See pic.
I probably just need to tweak it but from what you said about the float lights it seems this light is controlled outside of the aircraft.cfg file.
Any ideas where to look?

Thanks
Josh


P3Dv4.5;R7 1700X o/c 4GHz;RX580 8Gb;16Gb 2666Hz RAM; Corsair 110h;34" UW monitor;120Gb SSD-OS;1Tb SSD-P3D + 3 HDD;Cambridge 2.1 audio; ASUS XONAR DX;CH Yoke;TMpedals;mytraffic06a;REXWWA,TD,SF,EF;WL2;FSXWX;3D Redux;Plan G;NextGenMesh

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,631
  • Troubleshooting
    • View Profile
Re: 3D Redux Lights Goose 21A
« Reply #3 on: June 20, 2019, 01:00:24 AM »
 :-\   Sorry, I don't.  I've never learned about that.   :'(  Maybe someone else here knows about it?   ???

I apologize.  It is late, and I am very tired.  I will ponder this question more at a better time.  G'nite.   ;)
« Last Edit: June 20, 2019, 01:03:47 AM by jeff3163 »

Win10Pro64, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, NVidia GTX 1080 Ti, 1T/1T SSD's for Sims/OS, 3x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

Garry

  • Misty Moorings Team
  • Member
  • *
  • Posts: 190
    • View Profile
Re: 3D Redux Lights Goose 21A
« Reply #4 on: June 20, 2019, 04:32:33 PM »
Jeff
Well I had a pleasant surprise when I checked the lights for my HP Goose, the LIGHTS config was slightly different to the G21A inasmuch as the float lights were shown [navgre, navred] and consequently much brighter.

So here is the config I'm using for G21A for you to try, if you like. [I added the 22 and 45 deg lights just for the hell of it]

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
//light.0 = 2, 1.2, 25.1, 4.5, fx_shockwave_strobe
light.1 = 1, -15.6, -0.26, 4.4, fx_shockwave_beaconh ,
light.2 = 4, 1.60, 0.00, 2.70, fx_shockwave_vclight,
light.3 = 5, -3.6, -12.1, 3.5, fx_Shockwave_landing_light_tail // Shockwave light
light.4 = 5, -1.2, 13.6, 4.6, fx_Shockwave_landing_light_short
light.5 = 5, -1.2, -13.6, 4.6, fx_Shockwave_landing_light_short
light.6 = 3, 0.45, 24.90, 4.6, fx_shockwave_navgre
light.7 = 3, 0.50, -24.85, 4.6, fx_shockwave_navred
//light.8 = 2, 1.2, -25.1, 4.5, fx_shockwave_strobe
light.9 = 5, -1.2, 13.6, 4.6, fx_shockwave_landing_light_narrow_down_22
light.10 = 5, -1.2, -13.6, 4.6, fx_shockwave_landing_light_narrow_down_45
light.11 = 5, -3.6, -12.1, 3.5, fx_shockwave_landing_light_narrow_down_22
light.12 = 5, -3.6, -12.1, 3.5, fx_shockwave_landing_light_narrow_down_45

I can definitely say that the flashing light I get on the port float light is nothing to do with the LIGHTS config. I remmed out everything shown above and still got that flashing float light plus a couple of others.

Regards
Josh


P3Dv4.5;R7 1700X o/c 4GHz;RX580 8Gb;16Gb 2666Hz RAM; Corsair 110h;34" UW monitor;120Gb SSD-OS;1Tb SSD-P3D + 3 HDD;Cambridge 2.1 audio; ASUS XONAR DX;CH Yoke;TMpedals;mytraffic06a;REXWWA,TD,SF,EF;WL2;FSXWX;3D Redux;Plan G;NextGenMesh