Jeff
Well I had a pleasant surprise when I checked the lights for my HP Goose, the LIGHTS config was slightly different to the G21A inasmuch as the float lights were shown [navgre, navred] and consequently much brighter.
So here is the config I'm using for G21A for you to try, if you like. [I added the 22 and 45 deg lights just for the hell of it]
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
//light.0 = 2, 1.2, 25.1, 4.5, fx_shockwave_strobe
light.1 = 1, -15.6, -0.26, 4.4, fx_shockwave_beaconh ,
light.2 = 4, 1.60, 0.00, 2.70, fx_shockwave_vclight,
light.3 = 5, -3.6, -12.1, 3.5, fx_Shockwave_landing_light_tail // Shockwave light
light.4 = 5, -1.2, 13.6, 4.6, fx_Shockwave_landing_light_short
light.5 = 5, -1.2, -13.6, 4.6, fx_Shockwave_landing_light_short
light.6 = 3, 0.45, 24.90, 4.6, fx_shockwave_navgre
light.7 = 3, 0.50, -24.85, 4.6, fx_shockwave_navred
//light.8 = 2, 1.2, -25.1, 4.5, fx_shockwave_strobe
light.9 = 5, -1.2, 13.6, 4.6, fx_shockwave_landing_light_narrow_down_22
light.10 = 5, -1.2, -13.6, 4.6, fx_shockwave_landing_light_narrow_down_45
light.11 = 5, -3.6, -12.1, 3.5, fx_shockwave_landing_light_narrow_down_22
light.12 = 5, -3.6, -12.1, 3.5, fx_shockwave_landing_light_narrow_down_45
I can definitely say that the flashing light I get on the port float light is nothing to do with the LIGHTS config. I remmed out everything shown above and still got that flashing float light plus a couple of others.
Regards
Josh