« previous next »
Pages: [1]

Author Topic: Newest Object Lib. Tester  (Read 3615 times)

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Newest Object Lib. Tester
« on: June 14, 2015, 04:56:29 PM »
I installed the latest Object Library tester today.

All objects are there, including the orange smoke. One item I am missing is, the regular smoke effects from the two chimneys on object #9. Which is on the New Brads B&B Bait and BBQ Bldg?.

When I put myself at PANT. The chimney smoke isn't present, as seen in RTMM's screenshot.

Any ideas how to get the smoke to show up, or what smoke file I may be missing and where it's located etc.

THX

GrayRider
« Last Edit: June 14, 2015, 04:58:04 PM by GrayRider »
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

stiletto2

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,342
Re: Newest Object Lib. Tester
« Reply #1 on: June 14, 2015, 05:54:11 PM »
Hi GrayRider,

Check your FSX/P3D Effects folder for the file named fx_VentSteam.fx.  That is the effect being used. 

Rod
Logged

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Newest Object Lib. Tester
« Reply #2 on: June 14, 2015, 06:05:24 PM »
Rod.

I'm missing the fx_VentSteam.fx in my FSX effects folder.

Where can I find it or get it?.

GrayRider
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

ualani

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 1,739
  • Legacy RTMM Library Manager
Re: Newest Object Lib. Tester
« Reply #3 on: June 14, 2015, 06:23:29 PM »
Logged
Legacy RTMM Library Manager
Custom Objects Design
Legacy Scenery Design
Support

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Newest Object Lib. Tester
« Reply #4 on: June 14, 2015, 08:02:35 PM »
ualani.

I added the fx_VentStream.fx effect. It does show up when I go to PANT. While I was at PANT, something else took place. For some reason. About six feet above the # 1 object. I'm seeing a black square box with a number 1 in it??. This showed up after I added the missing smoke effect. I did take a screenshot of it. I'd have to e-mail it to someone that can look at the screenshot. I have no idea why or how the black box got there etc.

This just isn't my day.

GrayRider

Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

ualani

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 1,739
  • Legacy RTMM Library Manager
Re: Newest Object Lib. Tester
« Reply #5 on: June 14, 2015, 09:42:29 PM »
Take the screenshot and post it here so everyone can see it. Check the "attachments and other options box" just below the reply box and browse to your saved screenshot.
Logged
Legacy RTMM Library Manager
Custom Objects Design
Legacy Scenery Design
Support

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Newest Object Lib. Tester
« Reply #6 on: June 14, 2015, 09:53:01 PM »
Here is the screenshot. I hope it shows up

GrayRider
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Newest Object Lib. Tester
« Reply #7 on: June 14, 2015, 09:58:28 PM »
I don't know why it's not showing up. prior to this. I did replace the RTMM medical Libraries TEMP with the most current one.

GrayRider
« Last Edit: June 14, 2015, 10:02:56 PM by GrayRider »
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

ualani

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 1,739
  • Legacy RTMM Library Manager
Re: Newest Object Lib. Tester
« Reply #8 on: June 14, 2015, 10:33:33 PM »
George,
It isn't you. It looks like something was accidentally put in the newest tester. It shouldn't affect anything other than the tester.  I'm sure that Doug will fix it.
Logged
Legacy RTMM Library Manager
Custom Objects Design
Legacy Scenery Design
Support

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Newest Object Lib. Tester
« Reply #9 on: June 14, 2015, 11:00:50 PM »
OK.

Thanks for the heads up. I thought I was having a bad day.

GrayRider
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

spud

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,082
Re: Newest Object Lib. Tester
« Reply #10 on: June 15, 2015, 10:40:16 AM »
The big black no. 1 showed up in the latest tester for me too so its a glitch in the download I assume.
 8)
Logged
Later,

Spud

jsapair

  • Hero Member
  • *****
  • Posts: 1,194
  • Don't follow me, I'm lost.
Re: Newest Object Lib. Tester
« Reply #11 on: June 16, 2015, 09:15:44 PM »
Looks like maybe a gate from one of the default tutorials?
Logged
Jsapair

spud

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,082
Re: Newest Object Lib. Tester
« Reply #12 on: June 17, 2015, 12:11:28 PM »
Just had a thought (I know, I know, that's dangerous) but perhaps it was put there to point out which test object was Number One????   :)
Although most places count from right to left ya just never know????  ::)
 8)
Logged
Later,

Spud
Pages: [1]
« previous next »