« previous next »
Pages: [1]

Author Topic: Bob will not start in P3D  (Read 6807 times)

Handie

  • Sr. Member
  • ****
  • Posts: 605
Bob will not start in P3D
« on: February 24, 2015, 12:38:54 PM »
Hello,

I installed Bob in P3D v2.4 but it will not start, even if I press Ctrl + E
Does it work for you ? How did you make ?
Thank you for helping me  ;)
Logged
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

dexthom

  • Guest
Re: Bob will not start in P3D
« Reply #1 on: February 24, 2015, 02:40:33 PM »
Greetings Handie,  Bob does work for me and I didn't do anything to it, just copied to the Sim Objects folder with the rest of the aircraft.  He is a freebie so you could download him again and reinstall.  Good luck!
« Last Edit: February 24, 2015, 03:04:50 PM by dexthom »
Logged

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Bob will not start in P3D
« Reply #2 on: February 24, 2015, 03:25:29 PM »
I have all done well, but nothing to do, it will not start, the engine will not turn on  :(
Logged
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Bob will not start in P3D
« Reply #3 on: February 24, 2015, 09:07:52 PM »
Hi Handie,
     Are you using the "Accu-feel" program?  That gives me trouble with my malibu boat.  It won't go anywhere with accu-feel activated.  I turn it off, and the boat works again.    8)

     If you use that, try disabling it.  . . . just a thought.   ;)

(I don't use "Bob", I have a Segway I got from you.  Thank you!)
« Last Edit: February 24, 2015, 09:09:48 PM by jeff3163 »
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Bob will not start in P3D
« Reply #4 on: February 25, 2015, 05:22:20 AM »
Hi Jeff,

No, I do not use "Accu-Feel" in P3D.
I do not understand why Bob does not want to move forward in my P3D while it working for others users.

I also use the segway (I took your version that is more "muscled" than the original, thank you), but I would have also liked to be able to serve me of Bob.
Logged
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

Bradallen43

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,002
Re: Bob will not start in P3D
« Reply #5 on: February 25, 2015, 08:34:14 AM »
Handie,

I'd ask about "Bob" not working over at ORBX because they are adding updates for the new edition of P3D 2.5. Since they created "Bob", maybe they can assist you better and help figure out why it's not working for you.

Brad
Logged

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Bob will not start in P3D
« Reply #6 on: February 25, 2015, 08:56:22 AM »
On the forum Orbx, we can not have support in relation to P3D for Orbx products that do not have triple installer, which is the case for Bob ...

Edit : I posted nevertheless a message about it on the forum Orbx ;)
« Last Edit: February 25, 2015, 09:35:19 AM by Handie »
Logged
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

dexthom

  • Guest
Re: Bob will not start in P3D
« Reply #7 on: February 25, 2015, 04:22:05 PM »
Greetings Handie,  I just checked Bob and now mine won't start either.  It looks like the hotfix killed him  Because he was working last week.
Logged

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Bob will not start in P3D
« Reply #8 on: February 25, 2015, 04:35:14 PM »
Thank you for your feedback, Dexthom, at least I'm not alone in having a lazy Bob  ;)
Logged
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Bob will not start in P3D
« Reply #9 on: February 26, 2015, 11:20:05 AM »
Logged
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

dexthom

  • Guest
Re: Bob will not start in P3D
« Reply #10 on: February 26, 2015, 11:48:27 AM »
Thank you Handie.  I will give it a try.  I didn't pay much attention since I mostly use Bob for screen shots.
Logged

dexthom

  • Guest
Re: Bob will not start in P3D
« Reply #11 on: February 26, 2015, 01:14:33 PM »
He is now motivated!
Logged
Pages: [1]
« previous next »