Author Topic: Totam Bright Operations Center  (Read 17606 times)

spud

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,082
Re: Totam Bright Operations Center
« Reply #30 on: February 24, 2013, 10:39:18 PM »
Boy this is getting completely bumfuddled the more it is discussed. First and foremost unless I'm completely confused Doug has NOT I repeat NOT done any version 2 of Totem Bight Operations Center for ORBX PAKT payware airport If you have that payware package installed then you need to use the zip file that is marked for use with the payware airport.  It has NOT been updated in any way so if you already had it installed with your ORBX PAKT payware airport then you do NOTHING! 

With the PFJ scenery area and the included PAKT airport then the v2.0 will be the one you download and install.  If you had the original Totem Bight you need to delete it first then add the v2.0.
 
Nothing mysterious here, if you do not have Totem Bight and do not have the ORBX payware PAKT airport download and install the v2.0 scenery.  If you  do have the original Totem Bight and the PFJ PAKT then delete the old Totem Bight download and install the new v2.0.

That's it K.I.S.S.
 8)
Later,

Spud

Bradallen43

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,002
Re: Totam Bright Operations Center
« Reply #31 on: February 25, 2013, 08:06:24 AM »
Like Spud said, the one with the red highlight is for PAKT Payware airport. It's an update I did that will change version 1.0, the original one I did for default PFJ, to version 2.0 and will make that fit with the new shorelines of the water that changed with the installation of the payware airport. So if you use the PAKT payware airport for Ketchikan, you need to install only that version.

The top listing that is dated this month is for default PFJ and Doug did that version.

The reference to PAKT with SP1 needs to change to just say "PAKT with Payware Airport" because SP1 is a patch that everybody needs to have installed and doesn't change shorelines around extremely like the payware airport for Ketchikan does.

Sorry for the confusion folks but that's why we have these forums. Thanks for helping us make RTMM less confusing.

Brad
« Last Edit: February 25, 2013, 08:49:45 AM by Bradallen43 »

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Totam Bright Operations Center
« Reply #32 on: February 25, 2013, 03:58:08 PM »
I went take a ride to Totem Bight Operation Center, with the version of the payware  airport Orbx PAKT.
There is a small problem with the ramp and the floor, as noted by GrayRider.
But maybe we're not supposed to go up there !  ;)

Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

spud

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,082
Re: Totam Bright Operations Center
« Reply #33 on: February 25, 2013, 05:14:36 PM »
Nadine,
perhaps Brad will confirm that his Totem Bight that is compatable for the ORBX Payware PAKT airport does or does not have a hardened ramp.  As I understand it it does not have a hardened ramp.  What say you Brad?
 
Only the new file for plain old PFJ (no addon airport) has been updated with the hardened ramp as far as I know.
 8)
Later,

Spud

Bradallen43

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,002
Re: Totam Bright Operations Center
« Reply #34 on: February 25, 2013, 05:29:13 PM »
Yes that is a ramp not made for aircraft at this time. I don't use PAKT payware airport so there are no plans to make a change to this version.

Brad

Dragnhorn

  • Sr. Member
  • ****
  • Posts: 751
  • "Ahhhhh..the smell of black powder in the morning"
Re: Totam Bright Operations Center
« Reply #35 on: February 26, 2013, 12:13:41 AM »
That answers my question Brad.   I made sure I had the version used with FTX's PAKT and was unable to go up the ramp.  No big deal really.  Have to say though.....the inside of the building with the guy working on the aircraft is a neat bit of kit.    :D
Rob Abernathy
aka Dragnhorn

PC specs: 
Intel Quad Core i7 4790k Devil's Canyon (Haswell), 4.0 GHZ, /Gigabyte 87 UD4H 32 GB mother board, 16 GB DDR3 1866MHZ, Nvidia GTX 760 2 GB x 2 SLI, 2 TB 7200RPM HDD, Cpu Liquid Cooling Unit LVL 4, 750W Thermaltake, Windows 7 64 bit

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Totam Bright Operations Center
« Reply #36 on: February 26, 2013, 05:38:40 AM »
Thank you for the answer, this is the reason that it is noted to take " Bob " to visit the hangar ;)
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

Bradallen43

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,002
Re: Totam Bright Operations Center
« Reply #37 on: February 26, 2013, 09:12:14 AM »
Okay, I've added some ramps that should work for Amphibians to my PAKT Payware version of Totem Bight. Rob will be posting some results here shortly I hope.

Brad
« Last Edit: February 26, 2013, 10:21:34 AM by Bradallen43 »