« previous next »
Pages: [1] 2 3

Author Topic: Totam Bright Operations Center  (Read 17676 times)

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Totam Bright Operations Center
« on: February 21, 2013, 05:33:13 PM »
I installed your upgrade for Totam Bright today.I did download the correct upgrade to use,because I do have the ORBX PAKT SP1 addon.

Before I installed the upgrade.I deleted my previous version of Totam Bright v1.0.It does show up,when I go to it.When I go up the ramp and taxi up onto the deck.There I'm a little bit sunk into the deck in front of the hanger.Maybe I have an elevation issue,but not sure?.
I did install the optional VFR flight from PAKT to Totam Bright Lodge.When I select the flight it doesn't load up?.The other flight from Misty's Place to totam lodge does load up.

I'm curious what I shold be seeing,when I'm at the lodge?.When I go to the scenery page to download the upgrade.I clicked on the picture there.What I'm seeing is different,than what the picture is showing?.

Maybe I shouldn't have deleted my previous version.The upgrade may have been an extention of version v1.0?.

Oops.I may have put my question in the wrong topic.

GrayRider



« Last Edit: February 21, 2013, 05:39:32 PM by GrayRider »
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Totem Bight Operations Center
« Reply #1 on: February 21, 2013, 09:21:15 PM »
Hello George,
     Can you post some pics of exactly what you're seeing?

I just installed Totem Bight Operations Center onto my system, after reading your post.  I disabled the previous versions and installed this one "as-is" from the zipfile.  I added it to my scenery library.  It's not dependent on the previous versions at all.  Here's some pics I snapped.









 8)  Thanks Doug.  ;)
« Last Edit: February 21, 2013, 11:50:05 PM by jeff3163 »
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Totam Bright Operations Center
« Reply #2 on: February 22, 2013, 01:59:49 PM »
Jeff.

I down loaded the zip that say's in red.Use this one if you have PAKT SP1,and I do have the ORBX PAKT SP1 installed.When I looked at the contents in this one.The thumb nail pic,shows something else.Maybe theres two different ones,such as Totam Bright Lodge and Totam Bright Operations Center?.

In the meantime.I downloaded the other totam bright zip.Now I see what I should be seeing.The only thing I see is.The house to the right,that sits by itself.There is a car,kind of behind the house.The car is sitting on the water.Otherwise the addon is fine etc.

GrayRider

Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

spud

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,082
Re: Totam Bright Operations Center
« Reply #3 on: February 22, 2013, 02:25:43 PM »
I'll admit I don't fly the flight plans much, just crank r' up and go.  However I looked at the Totem Bight download again regarding the flight plan and FWIW I can not get it to load into my sim.  First thing is it says Totem Bay Lodge which is incorrect should be Operations Center.  I even re-copied it from the down load to my flight plan folder (FSX default location) and there is something wrong with the flight plan as it simi-loads but displays unknown for the starting position and nothing for the destination.
All the above being said the location should be Totem Bight Operations Center and that should be reflected on the flight plan.  With Dieter's CVS files Plan G shows it across from Murphy's Pullout with that name too.
I do not have FTX PAKT so can not comment on that particular download.
 8)
Logged
Later,

Spud

spud

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,082
Re: Totam Bright Operations Center
« Reply #4 on: February 22, 2013, 03:52:03 PM »
I believe that the old flight plan does not work due to it being copied from the old scenery file and not made over with the new location as the destination.  FWIW not being Plan G literate I have kludged together a flight plan that will at least load in the sim and move your A/C to the starting point (PAKT).  Because Doug is on vacation this week I'm going to attach that plan to this post.  Try it and see if it will direct you to Totem Bight Operations Center.  The old plan said ..... Lodge which is incorrect.
 8)
Logged
Later,

Spud

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Totem Bight Operations Center
« Reply #5 on: February 22, 2013, 04:40:34 PM »
Boy, it seems to me that if a person were to start at Murphy's Pullout instead of PAKT, they'd already be at Totem Bight before they even take off.  Just a short taxi to the North, eh?  :o  Why do we need a 2 mile long flightplan?  ???
« Last Edit: February 22, 2013, 07:34:06 PM by jeff3163 »
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Totam Bright Operations Center
« Reply #6 on: February 22, 2013, 05:58:20 PM »
My question also is.

When looking at the scenery down load page of Totam Bright,sceen in my screenshot.Is Totam Bright Lodge and Totam Bright Operations Center two different scenerys,or both rolled into one?.

If Jeff didn't deleted the previous version.Than I'd think I'm dealing with two different Totam Bright,side by side locations etc.

I'll probably reinstall the previous version,and see what happens.I'll get some shots of that one,and post them etc.

GrayRider
« Last Edit: February 22, 2013, 06:55:49 PM by GrayRider »
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

Bradallen43

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,002
Re: Totam Bright Operations Center
« Reply #7 on: February 22, 2013, 06:34:47 PM »
FYI,
The original edition of Totem Bight That I did was for default PFJ and not the SP1 edition. I believe Doug also did the latest version for default PAKT and not SP1.

Brad
Logged

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Totam Bright Operations Center
« Reply #8 on: February 22, 2013, 07:11:55 PM »
When I deleted my previous version of Totam Bright Operation Center.I didn't save it.Like Jeff mentioned.He didn't delete the previous version of Totam Bright Operations Center,before he installed the latest version,seen in my screenshot above.

I want to get the previous version back,if I can find it,and have a look at what was there.

In the screenshot above.The two download zips to choose from are different Totam Bright Operations Centers scenery's.One file is bigger than the other.

Some how I want to install both addons of Totam Bright.

GrayRider
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Totem Bight Operations Center
« Reply #9 on: February 22, 2013, 07:17:57 PM »
I didn't delete anything.  I just unchecked it from my scenery library.

Only use one version of the scenery location at a time.  Don't combine any of them. 

I am not using the Orbx SP1 PAKT airport, so I can't comment on that.  But the regular version works for me.

( . . . and it's not "Totam Bright", it's "Totem Bight"!) ;)
« Last Edit: February 22, 2013, 07:33:32 PM by jeff3163 »
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

Bradallen43

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,002
Re: Totam Bright Operations Center
« Reply #10 on: February 22, 2013, 08:39:15 PM »
You can install both but don't try to make both active at the same time in FSX. Also, I don't even see the version I did for RTMM, it's been replaced by Doug's newer version, so not sure why that happened.

Brad
Logged

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Totem Bight Operations Center
« Reply #11 on: February 22, 2013, 11:10:34 PM »
 :o . . . It occurs to me that Doug doesn't use the Orbx PAKT SP1 airport either.  So how's he gonna make a version for it?  ???  (even though there is that button for the SP1 version there.)  That's the question.  :o

I just swapped out my version for the one Grayrider is trying to work with, to see what shows up and where.  I tried to drive up the ramp.  The deck and ramp aren't hardened, I guess.  :-[

Does this look like what you've got, GrayRider?  ???







« Last Edit: February 23, 2013, 07:31:57 PM by jeff3163 »
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Totam Bright Operations Center
« Reply #12 on: February 23, 2013, 08:04:51 AM »
The new version of Totem Bight Operation Center, as stated, is only for PFJ default.
The "zip" at the bottom of the page, which is for those who have Orbx PAKT SP1, is the old "zip" which dates from January 2012.
I have Orbx PAKT SP1 and I had already installed the scene Totem Bight Operation Center which is in this "zip".
There is nothing new to the owners of Orbx PAKT SP1 ;)
Logged
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

GrayRider

  • Member
  • ***
  • Posts: 409
  • I'm an old retired Vet from the USAF.
Re: Totam Bright Operations Center
« Reply #13 on: February 23, 2013, 06:00:36 PM »
Quote from: jeff3163 on February 22, 2013, 11:10:34 PM
:o . . . It occurs to me that Doug doesn't use the Orbx PAKT SP1 airport either.  So how's he gonna make a version for it?  ???  (even though there is that button for the SP1 version there.)  That's the question.  :o

I just swapped out my version for the one Grayrider is trying to work with, to see what shows up and where.  I tried to drive up the ramp.  The deck and ramp aren't hardened, I guess.  :-[

Does this look like what you've got, GrayRider?  ???









Yes Jeff.This is the one I previously had,and deleted it.In my screenshot.The zip that says in red.Use this one if you have PAKT SP1.The PAKT SP1 download is the one seen in your screenshot.

The other zip download is the the newest one of Totem Bright seen in your other previous upgraded screenshots of Totem Bright Operation Center.I can't really use this one,because I have the ORBX PAKT SP1 installed.

GrayRider.
 
Logged
Thermaltake Armor Full Tower, ASRock Z68 Extreme 3 Gen 3, Intel i7 2600K SandyBridge 3.4 GHz - OC to 4.6 GHz, Corsair H70 Hydro CPU cooler, 16 Gigs of GSkill Ripjaw DDR3 - 1600, EVGA GTX570HD, 2500 MB of GDDR 5, 2.5GB, Corsair TX850 P/S, HT Omega 7.1 sound, AData S510 SATA III 120 GB SSD for boot dr

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Totem Bight Operations Center
« Reply #14 on: February 23, 2013, 07:26:32 PM »
Quote
I can't really use this one,because I have the ORBX PAKT SP1 installed.

Why not, exactly?  Is the shoreline different?  Does it look funny with the new one installed?  What makes it "unusable"?   ???
« Last Edit: February 23, 2013, 07:29:30 PM by jeff3163 »
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P
Pages: [1] 2 3
« previous next »