Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Bradallen43

Pages: 1 [2] 3 4 ... 19
Screenshots / Needed some sunshine, sand and tropical shorelines
« on: February 15, 2019, 02:22:04 PM »
Cruising along the Great Barrier Reef to Lady Elliott Island.

Tern Island

Lady Elliott Island

Addon Scenery and Enhancements / Coming Soon at Return to Misty Moorings
« on: January 18, 2019, 05:18:11 PM »
Herring Bay Cannery and Seaplane Base (Version 2)

 I've created an entirely new design for Herring Bay Cannery and Seaplane Base. This version 2 edition only works with an installation of the ORBX PAKT Ketchikan payware airport!!! Version 2 sits inside the payware airports Ketchikan photo-real area and is adjusted to mesh with that scenery. You'll need to have Pacific Fjords region installed as well as the payware PAKT airport for this to work for you.

 Doug and I worked on the original edition of Herring Bay Cannery (Version 1) and that works just fine within the default Pacific Fjords Ketchikan area and does NOT require the PAKT payware airport. So make sure you choose which version is right for you.

Version 2 has new objects, placements, seasonal trees and other enhancements to give the location an all new look and feel. I hope you like it. Enjoy this photo tour.

Herring Bay

Roadway Viewpoint

Fall Colors at the Seaplane Base

Cannery Loading Dock Side

Unloading their catch

Bald Eagles looking for a free meal

Sunset arrives at Herring Bay

Seaside Boat Rentals

Taildragger Diner Dockside Dining

Herring Bay Sunset

Addon Scenery and Enhancements / Refresh 2019 Notes
« on: January 09, 2019, 10:50:54 AM »
I wanted to briefly state why this refresh campaign is happening. And if you've read this before, it's just a re-affirmation then. As you may or may not know, one of our staff passed away last year. Guy "Spud" Maricich helped out with Quality Control and forum support mainly but he had a motto which he liked to use:"KISS", which stood for "Keep it Simple Stupid"

I met Spud in Pensacola FL back about 2014 and we discussed the state of RTMM and where things were going in the hobby and we were happy that FSX was still usable and that P3D would be a good way for the platform to stay viable into the foreseeable future.

Spud said to me that while he was happy with all the progress that RTMM had made, we needed to go back in to our library and start updating our offerings because of the confusing directions that were used in the readme instructions on things like objects required, etc. So I promised him that I would work with Doug on making those updates happen.

Well one thing lead to another as the old saying goes and nothing was updated. When Spud passed away, I dedicated my focus on making that promise come to fruition here at RTMM. So that's why this is being implemented.

 What is the timeline for all of this to be completed? Sometime in the not too distant future. It'll get done when it get's done. There's a lot of things to go through. A lot of text to edit and update. So please be patient and help us out when you can. Like Doug said, If you find something you believe needs updating,  let us know and we'll add it to our list.

 I'm going through the library of scenery and working on my locations. I've added snowbanks, made tree adjustments in placement and scale and even removed items that shouldn't be outside in wintertime, etc. Little things like that. Changing things like objects, adding some new ones maybe or changing some of the seasonal enhancements. Of course updating the documentation inside. Doug will be doing the same thing for his and other contributors will be asked to go in and do this for their scenery. Even if its just an update to the readme,txt file, these things need to be done.

  With the highlight icons that Doug created, the red exclamation point and green check mark, it's easy to find out what might have some new things to see at those locations.

I hope you stay up to date here at RTMM and we're making an effort to keep that in effect. We're here for the long haul at Misty's Place. Thanks for going along on the ride.


Here's some screen grabs I just took in Winter time conditions at the revamped Misty's Place using the new lighting enhancements. These are just the airstrip and roadway flood lights only!!! There will be a minimum of six possible choices you can have with the enhanced lighting effects but you'll get even more possibilities if you choose different combinations of these options!!! Experiment and see which options you prefer to use in your simulator.

1. No enhanced lighting used. (Default)
2. Airport Lighting with runway and taxiway lights
3. Floodlights near the Hangars and Docks
4. Floodlights just on the airstrip
5. Misty's Place road lights
6. All of the options active

Enhanced lighting on the airstrip helps me line up.

Extreme crosswind crab required today.

Flare and Rudder correction just before....


Kicking up some snow!

Made it!!

Visit the collection here.

Work is progressing on the update to Misty's Place. Doug and I have been actively working on a lot of things to our home base. Here's some night time lighting I'm working on currently. I wanted to keep Misty's Place in a soft light and not reliant on typical airport lighting with strobes, taxiway lights, etc. So, playing around with things I came upon a really nice effect using some of Steve Weinkamer's excellent lighting effects he created. I'm very happy with these results.

Several Summertime shots at the new Misty's Place.

Addon Scenery and Enhancements / Coming Soon at Return to Misty Moorings
« on: December 24, 2018, 07:35:46 AM »
In the spirit of giving during the holiday season, I wanted to share a few screenshots of what I'm working on at the moment.

An old friend gets a little makeover!

Misty's Place 2019 Edition is coming soon to RTMM.

More seasonal scenery will be included at Misty's Place.

Hangar doors are now closed in the winter months.

New points of interest are placed around the property.

Misty's office and pub is up and running.

Merry Christmas and Happy New Year from Return to Misty Moorings!

General Discussion / Tribute Scenery for "Spud"
« on: December 06, 2018, 01:10:11 PM »

With the recent passing of our friend, "Spud", I felt that I wanted to help keep his legacy alive somehow at RTMM. So, what better way than to come up with a little tribute scenery location in his honor.

 I had a small airstrip scenery location near Yakutat, AK that I'd been working on in my spare time for several years now but real life kept getting in the way of it's release. When Spud passed away unexpectedly, I knew immediately what I wanted to do.

So I put the final touches on "Spud's Beasley Creek Retreat". It has a tricky approach where you follow the winding creek to one end of the dirt strip. Or you can fly past and discover a beautiful Glacial Lake near the other end of the airstrip. There is seasonal scenery in place with trees and grasses that change using our Seasonal Switcher. Special thanks to Mike Broemme  who did a great job making the airstrip itself change with the seasons. If you arrive in winter, you'll see it covered in snow and ice. Also look for some other little touches that help make it "Spud's". The flags near the porch of the main cabin have the state flag of Idaho, where he was born. The US Navy flag which Spud served in as a Naval Aviator. The POW/MIA flag, United States flag and State of Alaska. And a very small cabin across the lake near the Glacier.

You should now be able to download this special place on our scenery page under "S".

Rest in Peace "Spud"!! You'll be missed.


Addon Scenery and Enhancements / SIRP Scenery for P3D v4??
« on: August 29, 2018, 01:21:20 PM »

I'm looking for the SIRP Scenery and can't seem to find that anymore. The link is inactive on the scenery page. Sorry if I've missed the reason why but I'm not in the loop since work has been so busy for me.


Misty Flying Club and Multi Player / P3D v4.3 and Cigar Box
« on: July 26, 2018, 11:26:07 PM »

After a new install of P3D v4.3, the Cigar Box app is not playing well for the first go around in the new sim. I installed the latest version from what's in the MFC downloads.

However, when trying to just fly a charter, it says "Aircraft not on the Ground" and it won't load.

Even though I'm not in slew mode and definitely on the ground, the client won't upload.

Settings unchecked the search by flight number so could I please get an assist on this so I can get back into the game again?

Thank you

Misty's Place / Prepar3D V4.3 Not Working
« on: July 22, 2018, 01:04:57 PM »
Well Crap!!

Installed Prepar3D v4.3, and it started up with the main menus showing for configuration, etc. I didn't start messing with any setting adjustments or tweaks, just changed to the Maule aircraft and took off from Eglin AFB to try things out. FPS was through the roof at over 100 but of course the settings were very light.

Landed and then had to shut down to do something else. Started the next session and changed some settings to see how I might be able to push the envelope and apparently, not very far. Now even though I have a Titan X, a lot of ram, and what I believe to be a pretty beefy system, now all I see is a black screen. I can see the menu but no matter if I back the settings down to zero, no cockpit view appears at all. Just a black screen.

Anybody else with Prepar3D v4 have any suggestions for me? It would be much appreciated. I read about there being bugs with old remnants of video card drivers causing this to occur so I'll try to see if I can remove them and try again but thought I'd ask my friends here at Misty's first.


Misty Flying Club and Multi Player / Tropical Charters for MFC
« on: July 21, 2018, 03:53:45 PM »
I've enjoyed doing charter work for MFC in various warmer climates. This club and Cigar Box is a powerful combination and interface and really gives lot's of choices for us all.

Just wanted to say thank you to Doug and Henry and Norm for giving us such a great new distraction here at RTMM to help keep me blissfully unaware of all the political poison out there in the world.


Misty's Place / Caribbean Break
« on: July 21, 2018, 03:48:07 PM »

After finishing up part 4 of BWEP: Dalton Highway, I needed a break from the pipeline. I love the scenery but miles and miles of pipe fitting has left me burned out and I just want to getaway from that. This project has two more long legs to go but I need a break.

Now, my work schedule has left me with a lot less seat time than I would like lately and when I do sit down with the sim, I just want to fly and relax and not do any scenery design. So, lately, I've been taking in the sights in warm tropical climates like Hawaii Photoreal and UTX TAC. (Ultimate Terrain X Tropical America and Caribbean) It's a nice break but lately, the OOM errors have increased with the sim. (Prepar3D v2.5) So I finally caved in and got v4.3. Now I just need some time to get it installed properly, configured and tweaked a little bit.

Then I'll need to install all the RTMM stuff again and start from scratch. I know that Instant Scenery doesn't work in v4 but my work around is to have a copy of FSX on the system I can use to design with. That practice will continue.

Oh well, just saying hello since I've not been so frequently stationed here at Misty's Place. I'll be back and will probably have some questions for users of v4 I'm sure once I finally install the damn software!!


Addon Scenery and Enhancements / Cabins By the Lakes II Now released!!
« on: April 07, 2018, 09:35:06 PM »
Cabin's By the Lakes II is now ready for download. Look for it under "C" on the scenery page.



General Discussion / Time to upgrade Prepar3D
« on: April 06, 2018, 04:29:43 PM »
Yep. It's time. I've been hanging on to Version 2.5 for as long as I can stand it. No more. Too many CTD's and memory related failures. It's too frustrating. Today, while flying my last leg of the MFC tour I was on, I got the "Prepar3D needs to close" message pop up just as I was approaching my final descent. I was able to reload the sim, then land and complete the flight but that was the final straw. More and more the duration of the flights was coming down to around 45 min to an hour and then boom. Out of Memory and CTD. There was noticable stuttering issues happening where the 60-70 FPS I was achieving suddenly went down to 2.5!! CHOP, CHOP, CHOP, a dozen or so bad stutters and then back up to the smooth FPS. This was happening a couple of times every flight anymore.

So, now I'll take the next step and move to the latest edition of P3D v4. I'm going for a clean install and not going to mess with trying to recover anything. I have my files stored for my scenery development outside the program so that's not an issue and I'll install from the beginning and only put in what I need this time. Might actually gain some storage space back too so wish me luck.

Only negative is the time invested is thrown away and the time it takes to get the sim set up and configured, flight yoke set up, etc. Oh well, I can always ask for help here right? There are others that have also taken the plunge so I'll be asking for help I'm sure.

Here goes!!


Pages: 1 [2] 3 4 ... 19