Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Timmy74

Pages: 1 2 3 [4]
46
Tim,
Actually either way would work, but for good housekeeping you should do it as in your first example. Just make sure you have things specifically like this:

"FSX"-
-
"Addon Scenery"-
-
"Misty Morrings"-
-
"Aiken Creek Camp"
      Scenery
"Annette Island Fly in"
      Scenery
"Bear Observatory"
       Scenery

Note that some may also require texture folders in the file structure as well.

Hello ualani,

Thank you again for your reply.

That is how I have mine set up...I just can not get it to work!?!

I will try jeff3163 way of setup.

Will report back.
Cheers,
Tim..

47
Hello chaps,

Thank you for your reply. ualani I have watched that video and know of the crazy quirks of Window 7. All of my other scenery seems to be entered correctly and works fine (there is a lot of them).  I will check out that other program that you sent me a link to as well. Thank you very much for that.

stiletto2 I was not aware that I had to enter each scenery package separately...!?   I did follow the instructions and the picture that is posted here (again please refer to the link in my first post) at Misty Moorings..

I was under the impression that the files were to go:

"FSX"-
-
"Addon Scenery"-
-
"Misty Morrings"-
-
"Aiken Creek Camp"
"Annette Island Fly in"
"Bear Observatory"
etc
etc.

But are you telling me that they need to be:

"FSX"-
-
"Addon Scenery"-
-
"Aiken Creek Camp"
"Annette Island Fly in"
"Bear Observatory"
etc
etc.

Is this correct?   

Kind regards,
Tim



48
Hello Chaps,

On the weekend I decided to do a full reinstall of all the Misty Moorings scenery addons, their updates and new Libs.

I followed all of your instructions -well I thought I had- but have come across this little pickle!?!

When I create a Misty Moorings folder in my "Addon Scenery" -which I have named "RTMM-V2"- Like your example (see below), then when I go to add them in Scenery Library in FSX I can not get it to work?

http://return.mistymoorings.com/object_libraries_build/images/folders_order_large.jpg

I must be having a brain fart and just can not get my head around it?! 

With my old version -which I named "RTMM" I just place all the "scenery" and "texture" files that came with each scenery into these two folders.... Which worked fine but was a bit of a nightmare when it came to changing a file for an upgrade...?

So I decided to go for the option you showed in that picture (see above) and thought "what a great idea if there is any updates to fix..this will be so much simpler..." But like I said I can not get the FSX Scenery Library to accept this entry?  All of the other Library addons from Misty Moorings have been added without trouble. eg:

RTMM Required Object LibrariesFSXP3D
RTMM Object LibraryFSXP3D
RWY12 LibraryFSXP3D
EZ Scenery Library FSXP3D
AhZx_LIB SUB LibraryFSXP3D
CeyX_Sceneries_LibrariesFSXP3D .

I have been clicking in the "white area" (the Windows 7 issue with adding entries to FSX Scenery Library), below the entries to get FSX to accept but to no avail...?

I am at a loss and was hoping one of you kind chaps could point me in the right direction as to my plight?  I am sure I am missing something simple?

Kind Regards,
Tim...

49
Help and Troubleshooting / Re: RTMM ICAO's not showing in Plan-G?
« on: October 16, 2012, 06:04:53 AM »
Dieter,

- Can you load an FSX made flight plan into PlanG?  (starting from any RTMM AFCAD airstrip)   Yes..

- Can you load RTMM flight plans into PlanG? (those that come with most sceneries)   Yes...


Maybe you should consider to uninstall your current PlanG and do a fresh install!   I think I may have too?

Thank you for all of your insight and patience with my issue.

Cheers.

Tim... ;)

50
Help and Troubleshooting / Re: RTMM ICAO's not showing in Plan-G?
« on: October 16, 2012, 03:10:49 AM »
Dieter,

I have just checked and I do have PF20_ADEX_KG.BGL in my RTMM addon scenery folder.

Cheers.

Tim....

51
Help and Troubleshooting / Re: RTMM ICAO's not showing in Plan-G?
« on: October 15, 2012, 03:40:41 PM »
Hi Dieter,

I have just gotten to work and will check for that file when i get home tonight.

However, I have the AFCAD for Misty's Place (PF20) in FSX.   I created an RTMM file in my "Addon Scenery" and all have been added and work well in FSX.   I can start a flight in FSX at Misty's Place but can not seem to start a flight plan at Misty's Place in Plan-G?   This has been my whole issue from the start?   

All of the other RTMM add on's that have AFCADS, I too can start from in FSX but can not start a flight plan from in Plan-G?   

Strange.....?

Cheers.

Tim....

52
Help and Troubleshooting / Re: RTMM ICAO's not showing in Plan-G?
« on: October 15, 2012, 04:29:44 AM »
Hi Spud and Dieter,

Thanks for your reply.   

I had done the "Build Database" function but  still can not seem to get a spot for Misty's Place to show up in Plan-G?

So is Misty's Place an AFCAD or a waypoint?   Either way I can not get Misty's to show up?

I have had to manually create one with an "Airstrip" icon in the "Create User Waypoint" but I can still not start a flight plan from there?

Cheers.

Tim...

53
Help and Troubleshooting / Re: RTMM ICAO's not showing in Plan-G?
« on: October 14, 2012, 03:34:43 AM »
Hi spud,

Thanks again for your reply.  Sorry for the delay in responce.  Work is "out of control" if ya know what i mean.....? ;)

Anyhow, getting back to your tips "Although you downloaded the files have you imported them into the Plan G database?", by this do you mean....
1) Start up Plan-G
2) Click on "Data"
3) Click on "Manage"
"Manage user way points" table appears with "Export", "Inport" and "Ok" buttons.
4) Click on "Import"
5) Navigate to where i downloaded "RTMM.csv"
6) double click
7) "Imported 144 of 144 records" appears.
I Should be right to go now?

That is the procedure that I have done with all of the other .csv files that have been downloaded for Plan-G.  They all seem to be there?

"Remember this is in Plan G only, a lot of the scenery for RTMM do not contain AFCADs and will not show up on the 'Go to Airports' page of FSX."

Strange? Because when i do load up "Go to Airports" page in FSX, Misty's Place (PF20) is in fact there?

So where am I going wrong?

Should one be able to start a flight plan (within Plan-G) at Misty's Place?   I can not seem to?  I have to either start PAKT or PANT.   I ask this because I see a lot of RTMM adventures start at Misty's Place? 

Just to be clear, I can start at Misty's Place in FSX but can not create a flight plan within Plan-G starting at Misty's Place?  It does not exsist??? :-\

Cheers.

Tim. :)

54
Help and Troubleshooting / RTMM ICAO's not showing in Plan-G?
« on: October 05, 2012, 07:43:01 PM »
Hi guys,

I am sure this is something really easy to fix but I can not seem to work it out?

I have downloaded all of the Plan-G files that relate to RTMM and can not get any of the ICAO's to show up?   I have the "POI", "light house and the such all showing but not any ICAO'S?

I got a tip from spud (thank you for that too) but I had done all of that in the firstplace?
Do I need to manual create them?
I am very confused as to what is going wrong?

Any insight would be greatly appriciated.

Kind regards.

Tim... ;)

55
General Discussion / Re: Hi, I'm new! (introduce yourself here)
« on: October 05, 2012, 07:36:38 PM »
Thank you jeff3163 and spud.

I will move this topic somewhere else because i do not want to clutter the welcome page. ;)

Cheers.

Tim...

56
General Discussion / Re: Hi, I'm new! (introduce yourself here)
« on: October 05, 2012, 04:20:10 AM »
Hi Guys,

Spewin about the multiplayer thing.....  Oh well will check out corbu1 sugestion.  Thank you for the heads up.

I have one question?   I have downloaded dieters Plan-G files, but "Misty's Place" and any other place with an ICAO does not appear with a "airstrip" icon?

What am i doing wrong?  Should I ask this question in an other part of the forum?

Cheers.

Tim...

57
General Discussion / Re: Hi, I'm new! (introduce yourself here)
« on: October 04, 2012, 04:13:56 AM »
WOW!!!

What a very warm welcome from you all.

Thank you.  ;)

Now off to download some RTMM stuff and get stuck into some seroius bush flying.

Oh....  Do you guys do any multiflying? 

Cheers.

Tim.

58
General Discussion / Re: Hi, I'm new! (introduce yourself here)
« on: October 03, 2012, 08:02:00 AM »
G'day fella's!

Its Tim here from OZ and I just wanted to say hi and to introduce myself.   I thought it was time to do some flying around PNW/PFJ/Tongass Fjords after flying OZ/NZ and PNG.

Please let me congratulate you chaps on an outstanding website!!  It looks like soooo much fun and am very keen to sink my teeth into some fantatsic adventures here at RTMM.

Thank you very much for letting me register.

Kind regards.

Tim

Pages: 1 2 3 [4]