Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Timmy74

Pages: [1] 2 3 4
1
General Discussion / Re: Re-install after OS crash...?
« on: May 21, 2020, 10:17:53 AM »
Hello Norm,

I have done the scenery tester -as instructed from you- and all of them are there...smoke included!
PHEW....I think I am right to go and just add all my RTMM scenes again.

Thank you very much for your help.

Cheers,
Tim.

2
General Discussion / Re: Re-install after OS crash...?
« on: May 20, 2020, 07:47:44 PM »
Hello nbrich1,

Thank you very much for your reply.

Okay... I have my E:drive set up as follows -these are the folders.

Europe
FSGX2010
NA
New Zealand
Norway
OZZIE
P3Dv4.5 -the sim
RTMM -which has ALL of my RTMM entries including the library's

I lost the scenery.cfg file because that was on the C:drive.  I had to reinstall Tongass and did the 40 terrain.cfg files the other night. It appears that i still have the AI traffic models fixes to make Tongass work in v4 due to P3Dv4.5 being on the E:drive and that is where my simobjects are.

Now inside my RTMM folder on the E:drive I have as follows...

AhZx_LIB SUB LibraryFSXP3D
CeyX_Sceneries_LibrariesFSXP3D
EZ Scenery LibrartFSXP3D
FSXP3D WH_BWEP Objects_SW 5_30_17
RTMM Medical and APP Libraries FSXP3D
RTMM Object LibraryFSXP3D
RTMM Scenery Object Tester
RTMMTwo Object LibraryFSXP3D
RTMMv4 -this file has ALL of the RTMM addon scenery
RWY12 LibraryFSXP3D
TWC-2 Object LibraryFSXP3D

These are all intact. I did consolidate the RTMM libraries as per instructions when I was installing the scenery early last year.

As for Scenery-World-Scenery they should all still be intact too. But could you give me some examples of files that should be there and I will check?  I am sure it will be okay because the E:drive was never effected.

Cheers,
Tim.

3
General Discussion / Re-install after OS crash...?
« on: May 20, 2020, 01:27:09 PM »
Hello All,

Just a quick question.  The other week -to my horror- I had a OS hard drive crash and lost P3Dv4.5!?

I did however, have my P3Dv4.5 main folder installed on my E: drive which is fine. But due to P3D having stuff naturally installed on the OS C:Drive I had to re-install P3Dv4.5 again.  I still have all of my addons and the such.

Now...I have RTMM installed on the E: Drive too but outside of the main P3Dv4.4 folder. So its still all there I just need to add them to Scenery Library -individually of coarse. Which now leads me to my question....

Do I have to go and "start from scratch" ALL of the install of RTMM!?  Or will I be able to just add them to my scenery Library?

So in short.. If one has a OS crash must one do a "Vanilla" install of RTMM? 

Cheers,
Tim.

4
Prepar3D-Version 4 / Re: Installing RTMM into P3Dv4
« on: September 07, 2018, 01:40:44 AM »
Thank you Jeff.

I had better get cracking....

5
Prepar3D-Version 4 / Installing RTMM into P3Dv4
« on: September 06, 2018, 07:49:44 PM »
Hello Chaps,

I am guessing that ALL of the library objects that were downloaded for my original FSX and P3Dv3 are the same as for P3Dv4...?

ie:
RTMM Required Object LibrariesFSXP3D
RTMM Object LibraryFSXP3D
RWY12 LibraryFSXP3D
EZ Scenery Library FSXP3D
AhZx_LIB SUB LibraryFSXP3D
CeyX_Sceneries_LibrariesFSXP3D

Then i just go and do all of the manual install of each and every RTMM scenery that is P3Dv4 compatible...yes?

Cheers,
Tim.


6
Prepar3D-Version 4 / Re: Installing Tongass Fjords into P3Dv4
« on: September 03, 2018, 08:41:39 PM »
Hello Brad,

That is exactly what i am after. Thank you very much for that link.  I will go over it with a fine tooth comb and get back to you if I encounter any issues.

It is much appreciated.

Cheers,
Tim. 

7
Prepar3D-Version 4 / Installing Tongass Fjords into P3Dv4
« on: September 03, 2018, 06:55:59 AM »
Hello Chaps,

I have read ALL the entries regarding installing Tongass Fjords in to P3dv4 but now where does it say that I need to use "Migration Tool" at all!?  Do I need to use this product or can one just install Tongass Fjords straight into P3Dv4?!

Also in your FAQ section under "Moving Tongass Fjords from P3Dv3 to V4 there are no likes to the suggested "Lorbi Addon Organiser"!?  What is it and do I need it?

I am asking here before I take the plunge becasue I am finding that the instructions to getting Tongass Fjords to work in P3Dv4 is guite daunting and a little all over the place.   Is there a "step by step" guide at all?

Thank you for any assistence
Cheers,
Tim.

8
Addon Scenery and Enhancements / Re: Milviz Beaver Repaint N001MM...!?
« on: January 30, 2018, 05:55:10 AM »
Hello,
The issues with the RTMM Misty Beaver paintscheme for the Milviz Beaver due to changes of the developpers in the model‘s tectures are fixed. The fixed paintscheme should now work with the latest versions of the Beaver released.

So if you experience texture issues on your Milviz Misty Beaver, these will appear on the wings, wingstakes and wingtails, then please redownload and install the paintscheme again.

I will find the fixed paintscheme (date: 01-28-2018) in the Enhancements section of the RTMM forums.

Hello corbu1,

Thank you very much.  It is great to finally have the RTMM paints working again. Now I can keep racking up the hours on the Milviz Beaver.

Maybe this fix should be mentioned in the "NOTAM's" page?

Many thanks and kind regards,
Tim.

9
Addon Scenery and Enhancements / Re: Milviz Beaver Repaint N001MM...!?
« on: January 23, 2018, 01:26:40 AM »
Hello,
O.k., thank you all! I found a threat on the Milviz forums explaing the cause of the texture anomalies.
It is as said, Milviz changed some time ago the textures with release of the spray expansion.

So the RTMM paint for this bird need to be fixed. I will do this as soon as possible, probably the following weekend. By the way, this is a good reason for making the Milviz Beaver ready for pipeline inspections with a BWEP paintscheme.
Thank you for the heads up on this issue, but I was very busy at work in the past months and didn‘t notice this issue. Please stay tuned, I‘ll upload a fixed version soon.

@av8erjm
Milviz paintkits offer great detail and lots of nice effects like weathering and dirt effects. This make the paintschemes look very nice and realistic. Also they use 4096 hd textures to achieve the nice look. The downside is, that the photoshop-files of the painkit are extremly huge in datasize. Also the files contain dozens of different layers you have to check out what they are used for and how to work with them properly.
This expands the time needed for doing a paintscheme.
But I love the Milviz paintkits, because you can do very accurate paintschemes.

Thank you very much corbu1 for taking a look at this and amending as necessary.

Regards,
Tim. 

10
Addon Scenery and Enhancements / Re: Milviz Beaver Repaint N001MM...!?
« on: January 23, 2018, 01:24:47 AM »
I still have my installers in my download folder.   ???



Thank you Jeff, My version is 170619.

11
Addon Scenery and Enhancements / Re: Milviz Beaver Repaint N001MM...!?
« on: January 22, 2018, 03:48:50 AM »
Would you be so kind as to tell me -step by step- how to go about finding the current version of the Milviz Beaver I have installed please...!?

The little icon that use to be present on my desk top -for installs-no longer works due to me opening up the MVAMS and denying it from upgrading to latest version...which is 171229.


12
Addon Scenery and Enhancements / Re: Milviz Beaver Repaint N001MM...!?
« on: January 22, 2018, 02:00:56 AM »
Hello Jeff,

How can I find the version number of the Milviz Beaver....!?  I have checked the aircraft.cfg file but it says nothing?  I have also loaded the Milviz MVAMS and it does not tell me either!?!?

I am pretty sure I have the version that was previous to the -the now new one- that was released on the 30 of December 2017.....171229. :o

How can i check which version I have please?

Cheers,
Tim.

13
Addon Scenery and Enhancements / Re: Milviz Beaver Repaint N001MM...!?
« on: January 21, 2018, 03:16:33 AM »

Sorry Timmy.  Not sure why some of your plane would not show the texture.  Maybe reinstalling the paint will fix it?  ???  Can you post a pic of it?

Hello Jeff,

Thank you for your reply. I have -multiple times- un-installed and then re-installed this paint and it is just the same each and every time....?





Cheers,
Tim.

14
Addon Scenery and Enhancements / Re: Milviz Beaver Repaint N001MM...!?
« on: January 20, 2018, 09:02:28 PM »
No reply's......!?

Thanks chaps!

15
Addon Scenery and Enhancements / Milviz Beaver Repaint N001MM...!?
« on: January 18, 2018, 06:20:24 AM »
Hello Chaps,

I have just downloaded and installed the Milviz Beaver repaints  for RTMM and for some strange reason the "starboard" flap/aileron, horizontal stabiliser and wing strut are black!?!

What have I done wrong....?

Any help would be greatly appreciated.

Regards,
Tim.

Pages: [1] 2 3 4