Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Beardgoblin

Pages: [1] 2
1
Screenshots / Re: Needed some sunshine, sand and tropical shorelines
« on: February 15, 2019, 07:23:06 PM »
Wow, positively cerulean - nice shots!

Looks a little too warm for my blood though - I'm a winter creature.

2
Addon Scenery and Enhancements / Re: Yes Bay Lodge V2
« on: February 15, 2019, 07:16:24 PM »
Here's what I see in FSX (just FSX, no DX10).



Just to complicate matters, this the first upload of V2, I snagged it about three hours after this thread was started:

http://forum.mistymoorings.com/index.php?topic=4303.0




3
General Discussion / ORBX sale Feb 2019
« on: February 14, 2019, 08:53:24 PM »
Not sure if/how such announcements are viewed here, so apologies if this proves to be a posting faux-pas!

Probably redundant anyway, as doubtless most RTMM'ers will be on their mailing list anyway, but just in case, ORBX are having a sale at the moment, 50% of a broad range of their stuff, including most if not all that fall within the RTMM area of interest.

Live now, lasts until 18th February 2019 at 01:00Z.

Now to decide if I want to PNW, or if I should grab Global Vector whilst its at 50% off...

4
Screenshots / Re: Moonlighting for Misty Moorings:
« on: February 14, 2019, 08:36:03 PM »
Okay, more time this evening, and I don't much feel like grappling with software and libraries (well, beyond installing the new RTMM library and a few new locations for this flight!).  No, whats called for tonight is a nice relaxing flight.

Not nearly so long as the previous one!

So, picking up where I left off, four Fleet Bay fishermen and their overnight bags are bundled into the air-taxi and we're off to Klawock Sea-plane base to drop them off for some R&R whilst their boat is being repaired.

Take off Fleet Bay, with dolphin escort:


Banking away:


Fly me to the moon...


I decided today, whilst I was updating the RTMM libs and adding a few locations, to dial my FSX cfg file back to default - I've tweaked it a bit (some almost two years ago, some more in the last couple of weeks), and whilst I've learned a lot the past couple of weeks, some of the early tweaks I made I've learned are either brute force overkill (and lead to some of the tearing/glitching I've seen) or are redundant, sometimes both.  I've been weeding them out, but thought I'd try fresh, see if I've actually improved anything.  Turns out I have - anything in the mid to far distance has been slow to draw clearly (auto-gen trees and ground testures, at least) leading to bland, fuzzy backgrounds like in this shot.  I'll be switching back to my previous config before I fly again!

I see ships!:


A veritable fishing flotilla:


Must be the Hunter Bay fleet, which means the cannery must be close by...

Waterfall, but no cannery:


Really low, and really slow:


Good job those big boats are there, I would've missed it otherwise!

Hunter Bay Cannery:


Fleet, Ferry, Falls and all.  Oh, and a lighthouse, too!

Close pass over the cannery:


Thats a mighty big ferry for such a small destination.

Still a cool spot though, lots to see.

Klinkwan Fish Camp:


Just a little west of the cannery, I almost missed both these locations, and would have if the fleet had not clued me in that I was getting warm!

Clouds gather:


Could the weather be about to turn on me?

Suddenly, Hydaburg!


In fact, Hydaburg, Craig and Klawock all crept up on me, they are much closer together than the impression I took from the map.

Suddenly, Craig!


Buzzing the Coast Guard:


The USCG think its cool when you buzz them, right?

Hey down there!


Right?

Still bugging them:


Right?  Hmm, dude in front looks serious, we best be on our way.

Climbing out:


Suddenly, Klawock!


Hello again!


I swear I'm not following them, officer! They just happened to catch up as I circled around to land at the harbour.  Honest.

Busy here, isn't it?


Coast Guards, looks like a Turbo Otter taking off, and just out of shot to the left, a Cessna coming in on final to the runway at Klawock.  Must be rush hour!

Another successful flight:


Tied up at the Klawock marina after a smooth landing and peaceful flight.  Well, maybe not for the Coast Guard so much.

Time to grab lunch and fresh coffee before the next Misty Moorings customer arrives.

Thanks for looking!

5
Screenshots / Re: Silt Lake Cabin
« on: February 14, 2019, 08:11:43 PM »
Cool sequence of shots, I'll have to get myself down that way, once I get PNW and install it.  On which note, ORBX have a sale on at present...

You're a braver man than I though - that aeroplane, whilst sleek and cool looking, looks a little delicate for the fjords and glaciers - especially in the undercarriage department!  ;)

6
Object Libraries for RTMM / Re: New RTMM Object Library
« on: February 14, 2019, 08:04:35 PM »
Thanks stiletto2/Rod, your diagnosis is spot on - total brain-fart on my part.  Moved to a shorter folder path, unpacked absolutely fine!  D'oh!  Cheers!

Once my uh, lapse of concentration, was sorted, instructions clear and easy to follow, didn't take long to install and seems to be working all fine and dandy now!

Cheers for all your hard work on this ualani/Steve  8)

Next flight will take me to the updated Yes Bay Lodge - the default Tongass Fjord X rendering was one of my favourite stop offs on a the PANT to PAWG/PAPG/PAJN runs I used to do back in 2017.  Can't wait to see the expanded/updated version with its satellite locations  ;D

7
Screenshots / Re: Moonlighting for Misty Moorings:
« on: February 13, 2019, 06:36:16 PM »
As promised, back on topic with some screenshots!

Sadly not many, life has conspired to divert my attention again!

Over in Fleet Bay, a fishing boat is in need of repair, so a mechanic and his mate, plus 400lbs of tools and replacement parts are our payload for the first leg of the flight:

Aloft once more - take off from Tamgas Harbour:


Passing low over Dall Bay:


Taking a long circle around the headland at Fleet Bay, so I can come in to land from an angle that doesn't have me making an approach directly into a confined space!

Putting the fleet in Fleet Bay:


Landed nice and smooth, taxied up without bumping any dolphins and dropped off passangers and cargo.

For the next leg we'll be running four fishermen with unexpeted shore-leave up to Klawock for some R&R.

More soon!

8
Object Libraries for RTMM / Re: New RTMM Object Library
« on: February 13, 2019, 06:25:04 PM »
Cool - a number of item's I'd been waiting on the update for have been re-vamped (Yes Bay Lodge in particular!).

Sadly, when I try to extract the files from the zip I run into this error:



I've tried multiple downloads, to no avail.

Anything I can do from my end to resolve it?

9
General Discussion / Re: Hi, I'm new! (introduce yourself here)
« on: February 13, 2019, 06:16:17 PM »
One new guy to another, welcome @Thomas May  8)

10
Screenshots / Re: Moonlighting for Misty Moorings:
« on: February 13, 2019, 05:45:54 AM »
It looks like ISv1 and v2 are out of circulation, only ISv3 is available for purchase these days.

I'm 90% convinced its a limitation of the demo version, I should probably stop being so tight fisted and drop the $$ ;)

Maybe one or two things left to try first, though.  If it turns out i need tech-help to get it working I'll start a new thread for that in the relevant part of the forum.

I'll get this thread back on topic this evening with some more pictures of flying over stuff  ;D

11
Screenshots / Re: Moonlighting for Misty Moorings:
« on: February 12, 2019, 11:55:07 AM »
Thanks jsapair - the eventual aim to roam further afield across the breadth of the whole SAK, Tongas, PFJ and PNW areas, but I'm still getting my hand and eye back in at present - my landings are still prone to be on the heavy side (as documented above), so I'm doing strings of short hops so I can get plenty of practice on those!

Cheers brad, I'll have a gander through that info later, when I get home from work - I'm certainly interested!  I've caught myself scoping out likely spots for some tucked away cabin or jetty many times as I weave through the fjords...

I spent last evening getting the Instant Scenery 3 demo to talk to FSX:SE, and placing stuff with that seems a lot less painful than with the default SDK object placer.  It is not, however, reading all the custom objects - the default and some ORBX are there, but nothing else - so next step is to figure out if thats a limitation of the demo I'm using, or if I've put my RTMM libraries somewhere silly, or if I have to manually add them.

If I can get it to see other object libraries, or find evidence that it is a limitation of the demo, I'll likely drop the $30 for the full version and get stuck in.

I'll float an emai lto the relevant RTMM support address later when I've had a time to furtle round some more, see whats what and ask some of the many more questions I suddenly have  ;D

Hopefully a short 'slide-show' to add later, too.  Available flight time permitting!

UPDATE: Sadly, no pocs tonight (its almost 1am here now!), I've spent my evening trying to get the Instant Scenery 3 demo to see non-default objects.  Last attempt is compiling now, and then I'm done for the night.

FURTHER UPDATE: Well, that didn't work!  Try again, maybe tomorrow, but if so _after_ I get some flying done ;)

Message sent to RTMM contact email fao Scenery Director expressing interest and tentative plans for discussion/approval.

Now I gotta crawl off to bed!

12
Help and Troubleshooting / Re: Library Order Once and For All!
« on: February 11, 2019, 06:16:22 PM »
Hi LTCSZ,

check out the load order under the Scenery getting started page http://return.mistymoorings.com/getting_started/index.php

Scroll down to #8 for the Scenery Load Order advice.

And from new guy to another, welcome to RTMM  8)

13
Screenshots / Re: Moonlighting for Misty Moorings:
« on: February 11, 2019, 02:12:37 PM »
Thanks Jeff, glad you are enjoying them!

There shall be more soon (tm)!

14
Cheers simurq,  this will be very handy indeed!

15
Screenshots / Re: Moonlighting for Misty Moorings:
« on: February 10, 2019, 02:13:30 PM »
Thanks Bradallen43!

Ok, this one goes long.  Like way loooooong!  43 screenies all in - I got a bit carried away, so if this is a bit (or a lot!) much, let me know and I'll tone it down/cut it back/break it into multiple posts in future.  I hadn't intended to make a huuuuuge post, just sort of got into the weekend groove and it ended up that way!

Time for another busy day running folks around PFJ for Misty Moorings Taxi's!

On board today we have four passangers - two maintainance crew destined for the old Gwent Bay Cannery, to do some fixing up ready for the coming tourism season.

The hold contains a couple hundred pounds of tool boxes and hardware supplies.

The other two passangers are a little more interesting -

A junior USCG Officer on an inspection flight - we'll be circling/close passing a number of lighthouses and unmanned lights en-route, checking for damage or other issues that my not be so obvious up close. (I wanted to fly by some lighthouses to add to my 'installed addons' folder on my copy of the RTMM Google Earth KMZ file).

Finally, we have a US Fish and Wildlife Service Agent/Officer heading out to Hugh Smith Lake Hatchery, for a routine inspection.

Leaving Tamgas Harbour:


From here its just a quick circle around and cut through the hills of Annette Island to get to Mary Island so we can 'buzz' our first lighthouse.

Mary Island Light:


Second Pass:


Third time around:



Don't worry, I won't detail every single orbit - this post is going to be long enough as is ;D

One of the unmanned light towers:


Its only a short hop from the previous tower to Tree Point Lighthouse, where it seems they have company.

Tree Point:


Orbiting:


We circle around several times and get on the horn, but it seems all is well and no one is in distress, so we continue our flight.

Another unmanned light:


Straight on to the Green Island Lighthouse, just east of Dundas Island.

Green Island Lighthouse, blinking at us:


From the Cabin:


Peeling off:


Into the Fjords:


Passing over Ryan's Cabins:


Across the sound:


In the distance, you may be able to just about make out the Gwent Bay Cannery.

Overhead, a 'tube' heads NW, to who knows where, missing out on all these views.

Gwent Bay Flyby:


Local Traffic:


Arrival, Gwent Bay Cannery:


Dropping off half our passangers and most of our cargo, we're a little lighter when it comes time to carry on the trip.

Leaving Gwent Bay:


The Hidden Inlet:


Somewhere in the distance is Hidden Inlet Retreat.  Here I realise my 'Season Switcher' still isn't kicking in (I definately ran it before firing up FSX this time! Figured it out now - when I found the 'Windows Bug' video that shows why FSX wont set up scenery folders proberly I reinstalled everything in a more organised manner, but put the switcher exe in the RTMM folder, instead of leaving it in the main FSX Add-on Scenery folder - should be fixed now ;)).

Spot the cabin:


Humpback Lake Cabin is in this shot!  Just off the starboard wing-tip, in the mud there somewhere.

Looking back along Humpback Lake:


Looking ahead:


Hugh Smith Lake should be in the valley to the right, along a ways and just off to the right a bit...

Hatchery Flyby:


And there it is!

Hugh Smith Lake approach:


Moored at the Hatchery:


Once the Fish & Wildlife inspector was out of the way, a couple of ice-boxes of salmon fillets are loaded up - produce, I am assured, of the Hatchery staff fishing in their off-hours and bound for the restaurants and hotels of Ketchikan...

Rolling out:


Low over Badger Lake Cabins:


The last leg is out to New Eddystone Rock, the USCG Officer wants to do a surprise check on the new sightseeing boat service that runs to there, they should be training some new staff ahead of the tourist throngs next month.

Meaning - I just installed the RTMM AI boat that heads there, and I want to see if its working.

I didn't see the boat this trip, so I'm not sure yet.

Catching some rays:


More Fjord flying:


Winstanley Lake Cabin:


Looping around 'the Rock':


Wait, is that someone climbing the rock itself?

A closer look:


I think it is, you know:


We get on the horn and let the USCG know to send a launch out here, and give details on the boat pulled up there, too.  We don't have fuel to hang around - FSPassangers tracks 'pilot points' and gives pilot qualification ranks - running into your 45 min fuel reserve without an emergency gets you a penalty, and I want to qualify for turbo-props (rank 4) so I can fly my Kodiak!

Heading south:


I should have enough fuel to get back to Ketchikan without incuring a penalty score...

Channel Markers running in to Ketchikan:


I make it to Ketchikan with 5-10 mins to spare, only to stall into a rough landing because I was show-boating to try and get a touchdown sequence with the Cruise Liner as a backdrop, so I got my penalty score anyway!

Taxi-ing through ketchikan Harbour:


Moored up in Ketchikan:


So I was going to tie up and call it a day having mad it back to ketchikan, but a quartet of locals spotted me doing final shutdown and tieng off prep, and pretended they didn't know the difference between closing up and pre-flight, asking if I was headed out to Metlakatla.

The sky was turning to gold, but holding clear, and there was _just_ enough light to get back to Tamgas, and a fare _is_ a fare, and Tamgas harbour was close enough to home for them, so time for a quick dash before dark.

I was just supposed to get this post up to a nice round 40 (!!!!) images, but I got a little (more!) carried away, so we get 43...

Dusk take-off:


Ketchikan a-twinkle:


On final, Tamgas Harbour:


Tamgas sunset:


Moored up by dark:


In the last shot you can see my rudimentry efforts at scenery placement - some light-poles on the dock, a hut and RV by the parking lot to represent the Taxi service office and pilots bunking arrangements.

Not much, but its a start.

Night falls:


The lights even come on after dark.  Can't claim credit, other than finding scenery objects that already work.

You can also see the boat I added at the dock, on the left.

Its all rudimentary and needs a lot of work and refinement, but I'm please to have the first of my own scenery elements in place!

Thanks for reading this far, I hope it wasn't a total waste of your time!

Pages: [1] 2