Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - corbu1

Pages: [1] 2 3 ... 8
1
Misty's Place / Nemeth S76A helicopter
« on: June 05, 2019, 05:09:40 PM »
Hello,
for the helo guys among RTMM community, thete‘s a new whirlybird released.

It‘s the Sikorsky S76A by Nemeth Designs.....The S76 is a real nice looking machine I aleas loved.
Haven‘t purchased it yet, but will do for sure.
If it’s nice to fly, I could imagine tthe S76 in BWEP vip transport livery or in RTMM medical

Link to the product page:
http://www.nemethdesigns.com/payware/69-sikorsky-s76-spirit-fsx-p3dhtml.html

2
Screenshots / Fire Attack
« on: May 19, 2019, 05:01:25 PM »
it`s spring time, so it`s also time being prepared for the fire season.....

The RTMM mistyFIREHAWK is now in service as the RTMM Fire&Medic Airservice.


3
Prepar3D-Version 4 / Prepared v4.5 Hot Fix released
« on: May 13, 2019, 02:27:53 PM »
LM released today the announced hot fix for P3d v4.5.....
Hopefully this fixes the fps drops and problems which the original v4.5 release had.

We will see....

The list of fixes can be viewed here

https://prepar3d.com/news/2019/05/115307/

4
Prepar3D-Version 4 / Prepared v4.5 is released!
« on: April 09, 2019, 02:16:10 PM »
Hello,
I just noticed that LM released today P3d v4.5!

Here`s the Link to the list of fixes and Features:
https://www.prepar3d.com/news/2019/04/115244/


5
Addon Scenery and Enhancements / RTMM AS350 mistyASTAR
« on: March 13, 2019, 03:42:48 PM »
The Aerospatiale or Eurocopter  AS350  (since Eurocopter is renamed to Airbus helicopters, new AS350`s are called the H125) is well known by helo pilots for it`s agility and manueverability by low costs.
For These reasons it`s very often used by helooperators in the whole world.

It`s original nickname is the squirrel but in northern america it`s marketed as the astar...
...and now some we will have a RTMM livery as the mistyASTAR in the RTMM fleet.

The livery is for the payware Aerospatiale AS350 by Nemeth Designs.
It works in FSX and P3d v1, v2, v3 and v4.
There are different versions like a hoist, a police, a medic, a spray (for acriculture works) and also a float and a NoDoor (with removed doors for better visuals) Version in the package. Some of them are included in an addon-package which is sold separatly by Nemeth Designs.
So, there are plenty of possibilties to use this helo in the sim.

I`ll plan to optimize the livery for all versions as best as possible and offer instructions for them to install.
And of course, I plan pimping the Cockpit with some RTMM stuff....

For now, I`d like to show some screenshots of WIP..........

6
Screenshots / Liftoff from PF64
« on: February 23, 2019, 01:21:43 PM »
ready for checking the Pipeline.....

7
Screenshots / NVG - Night Vision Goggles
« on: February 17, 2019, 01:16:23 PM »
Hello,
today I first tried Night Vision Goggles (NVG) in P3dv4.4.
That`s a very cool feature especially with helicopters…..

There was a Freeware tool for fsx years ago simulating nvg goggles, since then I never tried the p3d inbuilt nvg feature.

I also got it working with my VR Headset ……...Did a first night flight around PF64 in the BWEP UH60L Blackhawk .........wow, is that cool!!!!!

If anyone is interested, there`s a nice thread on the P3d Forums, I saw today and gave it a try…
https://www.prepar3d.com/forum/viewtopic.php?f=6317&t=132629



8
Addon Scenery and Enhancements / CIRP AS350 Astar helicopter
« on: February 06, 2019, 04:24:21 PM »
Hello,
there`s soon a new helicopter for glacier explorations in the C.I.R.P fleet.

It`s the payware Nemeth Designs Aerospatiale AS350 Astar or Squirrel in C.I.R.P Colors.
This one is compatible with FSX, P3d v2 v3 and v4.......

The Astar is well known for it´s great Hot and High capabilities. This makes it an excellent helo for exploring the CIRP facilities and the glacier areas around.


9
Addon Scenery and Enhancements / RTMM ICON A5
« on: December 29, 2018, 11:02:47 AM »
Hello,
some time ago, Doug pointed me to a very nice small flying vehicle.....the ICON A5.

This is an very interesting small (two-seater) amphibious and nice designed airplane for short hop`s between our RTMM locations. And it should fit very nice into our RTMM fleet.....

I´m actually doing a RTMM paintscheme for it and like to share some WIP screenshots with you.
Most part of the painting is already down so it should soon be finished.
Just some small corrections and the Interiors have still to be Done.


Edit:
The repaint ist for the Freeware airplane at rikoooo ICON A5 by Markus Koerner.
It works for FSX and P3D v2,3 and 4.

The Link for Download:
https://www.rikoooo.com/downloads/viewdownload/17/464


10
Misty's Place / Hovercontrol is closed
« on: December 10, 2018, 02:14:25 PM »
Today, I learned it’s offical what I feared since a few weeks it will have happened.

The Hovercontrol website is closed!!!!

Founded in 2001, hovetcontrol was for 17 years the one and only dedicated website for helicopter-simulation based on MS Flight simulators. The site was the meeting point for all helosimmers out thete for so many years.

Sadly, it was already quite quiet on the forums there, it‘s now offical that the site closed forever......

 :'( :'( :'(

11
Prepar3D-Version 4 / P3dv4.4 release on November 28th
« on: November 27, 2018, 05:58:23 PM »
Hello,
rumors say P3dv4.4 version will be released tomorrow wednesday november 28th......

12
Website Discussion / Massive Threads today on website
« on: September 07, 2018, 11:33:34 AM »
Hello,
can anyone Check This member ShaylarHAR.

I‘d bet it is a bot ......
overfloating the website with advertising stuff?

13
Misty's Place / S70 FIREHAWK
« on: August 12, 2018, 03:20:40 PM »
Hello helosimmers,
there`s a great modification for the cerasim UH-60L Blackhawk avaible at simouthouse turning this Military helicopter into the S-70 Firehawk. The mod changes the outside model of the helicopter, but not the interior, gauges or flightdydnamics.

The Firehawk is great in fighting bush and forestfires with a 1.000 gallons/3.800 liters water tank with snorkel allowing it to refill the tank from rivers and lakes.
It also has a hoist system integrated and a skysun searchlight. The cabin is prepared to pick up to 14 firefighters. It can also be used for HEMS missions.

So, I have now upgraded my mistyHAWK to the mistyFIREHAWK.......................

The mod is done for FSX, but I installed it in P3D v4.3 and it works very well for me so far.

You can get the modification here:
http://www.sim-outhouse.com/sohforums/local_links.php?catid=36

Follow the install instructions!!

Below are a few screenshots showing mistyFIREHAWK at JLA Quartz Creek.
It is stationed there for the summer protecting the Western Chugach Region from fires.......



14
Prepar3D-Version 4 / Prepar3D 4.3 is released!
« on: June 25, 2018, 04:53:01 PM »
Hello,
LM just released version 4.3 of P3d.

see Fixes and features here:
https://www.prepar3d.com/news/2018/06/114765/



15
Addon Scenery and Enhancements / RTMM mistyCHINOOK v2
« on: May 06, 2018, 11:45:07 AM »
Hello,
I was waiting a lomg time Milviz/Nemeth would update their CH47D Chinook for P3dv4.
This one is my favourite biglifter helo.....and Yippiehhh...Yesterday they released the update!!!!

I was hoping this will happen and thought that is a good reason for updaing the RTMM paintscheme for the CH47D, too.

So, I have worked the last few days on the RTMM mistyCHINOOK in fresh Colors....

Pages: [1] 2 3 ... 8