Misty Moorings Forums
Return to Misty Moorings (FSX/P3D/MSFS2020) => Misty Flying Club and Multi Player => Topic started by: doksas on August 13, 2018, 06:55:28 PM
-
Hi,
which scenery i need for Tour flightplans?
I have ORBX PNW, SA, PF, and NR but in some flightplans on arrival i dont have nothing, so i must have more scenery but which?
Thanks.
-
Hi Igor,
The departure, destination, and waypoint locations are a mixture of Orbx airports, RTMM airstrips, Tongass Fjords X airports, and water landings. You'll need to read about the trip, to find the location names and any stop-overs.
If you have Pacific Fjords and Tongass Fjords installed, that is most of the destinations. RTMM mostly consists of cabins and lodges. There are certainly RTMM airport enhancements spread around too, but not RTMM created airstrips (except for Misty's, of course).
:-[ Oh, yeah ... the "PF's". I forgot those. Do we use those in the MFC tours? I guess so. :-[
Thanks for correcting me Steve. ;)
So, familiarize yourself with our scenery titles. Then you'll know if that place your looking for is RTMM or not. Most likely a TFX airstrip though. Ask if you need help.
-
Thanks Jeff, i not installed only Tongass Fjords but i have this and installing now. Thanks for help.
-
Just a little correction to Jeff's previous post. There are lots of RTMM created and fictional airstrips. Look for airstrips starting with PFxx.
Steve
-
Hi,
which scenery i need for Tour flightplans?
I have ORBX PNW, SA, PF, and NR but in some flightplans on arrival i dont have nothing, so i must have more scenery but which?
Thanks.
Sorry missed this post.. (I am away).. In each tour download there is an accompaning scenery requirements document which names the RTMM scenery pices required as well as scenery details as to the other dependicies and scenery order and set up.
-
Thanks to all, so, for IE MFC0005 i found in documentation:
Ketchikan Harbor (NOTAM: PayWare PAKT is necessary for this location)
PAKT Ferry
Misty's Place PF20
Annette Island Scenery Test (For a show)
Annette Island Fly-In
Metlakatla Jetty
RTMM Docks
Barnstormers **
Sewall Lodge – PF24
Khutze River Lodge - PF17
Kowesas River Lodge – PF10
Victory Valley - PF30
Doug's Outfitters (and Lodging)
Jedway Bay Sea Base
Owikeno Lake Area
Telkwa PF27
Chilcotin Plateau Airfield - PF28
Thumb Harbour - PF31
Desperate Moose Lodge - PF33
Dean River - PF32
Misty Moorings River Contest at PF32
Nadina Mountain Airstrip – PF15
Wilson River Lodge – PF25
So, i need to download all scenery? Huh, i need one more hard disk :)
-
So, i need to download all scenery? Huh, i need one more hard disk :)
... one ... more ... hard disk ... ;D
(my drives ;) )
(http://i1130.photobucket.com/albums/m531/jeff3163/MOON/Flight%20Simulator%20X%20Files/2018/MyDrives2018.png~original)
-
OMG :D
-
All of the RTMM scenery install/Libs, scenery, and other enhancements installed is just under 6 gig. I run a few HDD too - Kind of need lots of room for sim and simming files !!. And eventually as I keep building the MFC/RTMM tours, you will eventually need all of the RTMM scenery to be able to find all the locations.
Norm
-
I just finished a fresh install of P3Dv4.3 opting this time for a complete install rather than an upgrade. I'm in the process installing all of RTMM scenery and Norm is correct about the space needed. Currently I have both the compressed and uncompressed files all on a separate drive and they are almost 10GB total. Including the libraries, I am showing 220 entries in my scenery Library.
I did find one glitch along the way, during the install, my P3D config file became corrupted. I have no Idea why, but when I installed Active SKY 2016 for P3Dv4 the same thing happened. The tip off is that the default for NAV1 will read 108.02. Just delete the config file and let P3D rebuild it and all is well although you will have to do a quick review of your options as they are reset.
Also, since you are installing Tongass Fjords, be sure to read all the instructions. Some of the files will be in application data on your C drive no matter where you installed it, and they are needed.
Good luck and happy flying,
Henry
Misty Moorings Team
-
Hi again,
now i start MFC0015 SIRP Petersburg Exploration, and for this i need SIRP scenery but this does not exist.
"NOTAM: Temporarily Not Available ... there is a conflict in object texture that is being addressed. - 06.24.2018"
Do you have maybe older working version? What to do now?
Thanks!
-
There were several issues with the newest version of SIRP. For the time being you can get an older version here that should work for you.
https://www.dropbox.com/s/cp1hxsdwb4umo6p/SIRP_FSX_P3D_AddOn_v2.0.zip?dl=0
Steve
-
Great, thanks Steve !
-
Active Sky has a special program for P3D v4 and does not use 2016 Henry. You need to Install ASP4. You do not need a new license and it is a free upgrade.
-
One more question about scenery,
Is anywhere in one place all the scenery needed for the tours flights?
-
One more question about scenery,
Is anywhere in one place all the scenery needed for the tours flights?
All the scenery is located on the scenery page, but must be downloaded individually. There are no bulk downloaders here at RTMM. Read the information for each tour, then come here and grab what you need.
(or spend a day installing all things RTMM onto your system.) ;)
-
6gb?! What am I missing? I have all the scenery, 1.91GB and all the libraries, 7.42GB. That totals over 9GB. WTF?
-
BBQSteve,
If you have everything that you list, then I'd venture to say that you aren't missing anything. Are you having some problems or issues with something?
Steve
-
Each tour has a download file with it and that contains all the information for that tour. You will find each RTMM scenery required, all the ORBX scenery and an a sky vector chart of the flight. While this contains all the scenery required for the tour, it is not all the scenery you will eventually need. If you intend to keep flying the tours, eventually you will need to load all the RTMM scenery....I started with the "A's" and moved down the list, All my RTMM scenery files are in one place on a different drive from the sim...and then linked through the library. Hope that helps.
Henry
Misty Moorings Team
-
Steve, heck no I'm not missing anything, mine is beautiful, thanks for all the effort you guys have put in!
-
Just a quick follow up on the "Gitch". It seems in my case that when you save an airplane and airport as the default in P3Dv4.3 it caused a problem in the .cfg file. I have tried two fresh installs and the problem replicates it's self. It also seems to appear when installing certain software, but I haven't tested it. I have tried several weather problems....all specifically p3d4.3 approved, nothing changes. And for almost everyone, the "glitch isn't important because no one uses the navigation radios. I just leave the default as is and all is fine.
Henry
Misty Moorings Team