Author Topic: Back on the Glaciers........  (Read 9781 times)

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Back on the Glaciers........
« on: January 31, 2012, 05:55:20 PM »
Hi All,
I´m back on the Glaciers again!! CIRP scientists....I´m back on station;D

Puh!!!!! there were some nice winds blowing on the glacierfield today.....25-38 kts...


[attachment deleted by admin (old)]


P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Back on the Glaciers........
« Reply #1 on: January 31, 2012, 08:14:37 PM »
Good visibility though.  Not a cloud in sight.   :)  Nice pics, Klaus.

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

nikaslan

  • Jr. Member
  • **
  • Posts: 26
Re: Back on the Glaciers........
« Reply #2 on: February 28, 2012, 09:36:25 AM »
I am back on the glaciers too with my Aerosoft Huey!!!

Doing the heli runs again in real time weather... Too much snow last night and 40kts winds on the peaks.

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Re: Back on the Glaciers........
« Reply #3 on: February 28, 2012, 02:04:15 PM »
HI Nikaslan,
....Hope you have lot`s of fun there... There`s often blowing strong winds with realtime weather.
...I think the highest I ever recognized were nearly 55 kts... ;D ...lost completly tailrotor authority on transition from cruise to hover..
..The only thing I was able to do was getting speed and leaving the scene down to stewart ..... 8)


P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

nikaslan

  • Jr. Member
  • **
  • Posts: 26
Re: Back on the Glaciers........
« Reply #4 on: March 01, 2012, 08:52:38 AM »
Yes, too much fun!!  ;D

Especially trying to land the Huey (using HTR at 100%) on those tiny wooden helipads with 40 kts winds...

I almost didn't have to use the anti-torque pedals, the heli was stabilized by the wind alone!!!  :o

[attachment deleted by admin (old)]

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Re: Back on the Glaciers........
« Reply #5 on: March 01, 2012, 04:05:08 PM »
Very nice pictures, Nikaslan!
....the lots of helipads in the CIRP package makes it a beautiful playground for the whirlybirds!...

I also uste HTR (100%) with my choppers. Great tool!....makes flying choppers in FSX a real beautiful! :)
I think, I saw you doing some HTR configs on Hovercontrol? Is it you?


P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

nikaslan

  • Jr. Member
  • **
  • Posts: 26
Re: Back on the Glaciers........
« Reply #6 on: March 01, 2012, 05:11:41 PM »
Yes, corbu, I have done these HTR profiles and enjoyed it immensely!!
I am still refining them, especially the Cera 222b one.

The only heli that cannot be improved by HTR is the Dodo. Every other chopper can get way more realistic with HTR.. But a lot depends on the quality of the profile itself.

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Re: Back on the Glaciers........
« Reply #7 on: March 01, 2012, 06:23:35 PM »
Yes, there are a lot of parameters inside HTR possible to tweak.
I also did a few configs (MBB BO105, MD500 with Scott Swanberg and Fred Naar, tweaked the CERA 412).
....but it`s great fun tweaking it.....and finally in th end you get much more fun flying the whirlybirds :)


P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Re: Back on the Glaciers........
« Reply #8 on: March 03, 2012, 01:29:21 PM »
Here are some screenies of my CIRP workhorse! ;D

Cerasim Bell212 with a repaint converted from Gary Moore`s excellent repaint of the default Bell206.
I loved Gary`s polarbear so much, I wanted to have on my 212! :)

Far away from being perfect, but it was my first attempt doing a paint job in FSX, and it was a nice experience.
Many, many thanks to Gary Moore for giving me permission converting his great repaint. :)

[attachment deleted by admin (old)]


P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Back on the Glaciers........
« Reply #9 on: March 03, 2012, 03:20:06 PM »
Great job, Klaus.  The polar bear looks awesome.  ;D

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

stiletto2

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,341
Re: Back on the Glaciers........
« Reply #10 on: March 03, 2012, 04:24:16 PM »
Hi Klaus,

I did a repaint on the Carenado Mooney M20J awhile back and I know what its like.  You did a great job!

Rod

gdawg

  • Jr. Member
  • **
  • Posts: 34
Re: Back on the Glaciers........
« Reply #11 on: March 03, 2012, 10:57:11 PM »
It's looks fantastic Klaus! I certainly hope it ends up on the download page where it belongs!

Gary

Dragnhorn

  • Sr. Member
  • ****
  • Posts: 751
  • "Ahhhhh..the smell of black powder in the morning"
Re: Back on the Glaciers........
« Reply #12 on: March 04, 2012, 01:03:25 AM »
Great looking repaint Klaus!   I don't have the heli but I can surely admire a good bit of work here.
Rob Abernathy
aka Dragnhorn

PC specs: 
Intel Quad Core i7 4790k Devil's Canyon (Haswell), 4.0 GHZ, /Gigabyte 87 UD4H 32 GB mother board, 16 GB DDR3 1866MHZ, Nvidia GTX 760 2 GB x 2 SLI, 2 TB 7200RPM HDD, Cpu Liquid Cooling Unit LVL 4, 750W Thermaltake, Windows 7 64 bit

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Re: Back on the Glaciers........
« Reply #13 on: March 05, 2012, 03:34:46 PM »
Thanks All!!!
I´m very glad you like it! As said the original design is from Gary`s CIRP Bell206!


P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

nikaslan

  • Jr. Member
  • **
  • Posts: 26
Re: Back on the Glaciers........
« Reply #14 on: March 08, 2012, 02:30:31 AM »
Corbu, really nice job with the bear on the 212!!

I finished my CIRP tour with the default 206 (with the bear) and then got down for a day off at the lodge with my new 222B. Man, what a heli!!


[attachment deleted by admin (old)]