Author Topic: Milviz Beaver Repaint N001MM...!?  (Read 9242 times)

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Milviz Beaver Repaint N001MM...!?
« Reply #15 on: January 22, 2018, 09:06:24 AM »
I still have my installers in my download folder.   ???


Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

av8erjm

  • Sr. Member
  • ****
  • Posts: 615
Re: Milviz Beaver Repaint N001MM...!?
« Reply #16 on: January 22, 2018, 11:15:08 AM »
I believe when Milviz did the play n' spray expansion they changed something that wouldn't allow for repaints up to that point no longer show right, don't remember if I read it on the forums or where, what I did was keep the orig download just for my repaints especially the RTMM paints. I do have a question to the painters here, I have heard on some of the forums around that Milviz planes are harder to paint than say Aerosoft or Carenado  ETC. Just curious why is that, I've tried to work with the Otter, but my skills are very sub par

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Re: Milviz Beaver Repaint N001MM...!?
« Reply #17 on: January 22, 2018, 02:32:06 PM »
Hello,
O.k., thank you all! I found a threat on the Milviz forums explaing the cause of the texture anomalies.
It is as said, Milviz changed some time ago the textures with release of the spray expansion.

So the RTMM paint for this bird need to be fixed. I will do this as soon as possible, probably the following weekend. By the way, this is a good reason for making the Milviz Beaver ready for pipeline inspections with a BWEP paintscheme.
Thank you for the heads up on this issue, but I was very busy at work in the past months and didn‘t notice this issue. Please stay tuned, I‘ll upload a fixed version soon.

@av8erjm
Milviz paintkits offer great detail and lots of nice effects like weathering and dirt effects. This make the paintschemes look very nice and realistic. Also they use 4096 hd textures to achieve the nice look. The downside is, that the photoshop-files of the painkit are extremly huge in datasize. Also the files contain dozens of different layers you have to check out what they are used for and how to work with them properly.
This expands the time needed for doing a paintscheme.
But I love the Milviz paintkits, because you can do very accurate paintschemes.


P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

Timmy74

  • Jr. Member
  • **
  • Posts: 58
Re: Milviz Beaver Repaint N001MM...!?
« Reply #18 on: January 23, 2018, 01:24:47 AM »
I still have my installers in my download folder.   ???



Thank you Jeff, My version is 170619.

Timmy74

  • Jr. Member
  • **
  • Posts: 58
Re: Milviz Beaver Repaint N001MM...!?
« Reply #19 on: January 23, 2018, 01:26:40 AM »
Hello,
O.k., thank you all! I found a threat on the Milviz forums explaing the cause of the texture anomalies.
It is as said, Milviz changed some time ago the textures with release of the spray expansion.

So the RTMM paint for this bird need to be fixed. I will do this as soon as possible, probably the following weekend. By the way, this is a good reason for making the Milviz Beaver ready for pipeline inspections with a BWEP paintscheme.
Thank you for the heads up on this issue, but I was very busy at work in the past months and didn‘t notice this issue. Please stay tuned, I‘ll upload a fixed version soon.

@av8erjm
Milviz paintkits offer great detail and lots of nice effects like weathering and dirt effects. This make the paintschemes look very nice and realistic. Also they use 4096 hd textures to achieve the nice look. The downside is, that the photoshop-files of the painkit are extremly huge in datasize. Also the files contain dozens of different layers you have to check out what they are used for and how to work with them properly.
This expands the time needed for doing a paintscheme.
But I love the Milviz paintkits, because you can do very accurate paintschemes.

Thank you very much corbu1 for taking a look at this and amending as necessary.

Regards,
Tim. 

corbu1

  • RTMM Team Test Pilot
  • Hero Member
  • *
  • Posts: 2,107
Re: Milviz Beaver Repaint N001MM...!?
« Reply #20 on: January 23, 2018, 04:52:34 PM »
O.k., just downloaded the new paintkit for latest milviz beaver from their homepage. There are new files  included which should cover the problems with tail and wings. So the issues with the RTMM paintscheme should be possible to solve.

Interesting note about milviz paintkit huge datasize.
The old paintkit was 178 mb zipped and about 400 mb unzipped datasize.
The new paintkit is 314 mb zipped and nearly 700 mb unzipped datasize...........
« Last Edit: January 23, 2018, 04:54:24 PM by corbu1 »


P3Dv5.2HF1,ASP3D,MV WR,FirefighterX,OVRtoolkit,FreeAirMap;RXP GTN, VRK
i9 10900K;32GB3600RAM;Strix3090;SSD 970EvoPlus500GB Win10;SSD 970EvoPlus2TB P3D;SSD 970EvoPlus2TB XPlane;SSD 860Evo1TB DCS;HDD 4TB;VivePro;HOTASWarthog;Komodo Pedals

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Milviz Beaver Repaint N001MM...!?
« Reply #21 on: January 23, 2018, 07:17:38 PM »
 ;D
Hmmm, 700mb paint kit? ???  How many gallons is that, ... sounds like a lot?   :-\
You could paint an aircraft carrier with that, I bet!!  :P
« Last Edit: January 23, 2018, 07:20:36 PM by jeff3163 »

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

Handie

  • Sr. Member
  • ****
  • Posts: 605
Re: Milviz Beaver Repaint N001MM...!?
« Reply #22 on: January 24, 2018, 06:15:49 AM »
Hello,

The latest version of the Milviz Beaver is the 171229 (30/12/2017) :

http://www.milviz.com/forum/viewtopic.php?f=137&t=8700
Nadine
I9 9900K 5GHz-Asus ROG STRIX Z390E-Alim 1000G 80 Plus Gold-ASUS Dual RTX 2080TI 11G-Corsair Vengeance LPX 32Go DDR4-Watercooling Enermax LIQTECH II 360 RGB + 2 ventilos-SAMSUNG 970 EVO NVMe 500Go-2 SSD 860 EVO 2To-HDD Seagate Barracuda 4To-Ecran Dell UltraSharp-3840x1600-Windows 10 Pro 64 bit

simurq

  • Member
  • ***
  • Posts: 130
Re: Milviz Beaver Repaint N001MM...!?
« Reply #23 on: January 24, 2018, 06:29:53 AM »
Anybody knows how I can register at Milviz forums? I want to buy the Beaver but I can't see a forum registration link in case I have a question... Thanks!
Vüqar "Rustam" Quliyev

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Milviz Beaver Repaint N001MM...!?
« Reply #24 on: January 24, 2018, 07:40:54 AM »
Hi Rustam,
     I don't see a register button either.  I think registration is no longer allowed.   :-\

https://milviz.com/forum/index.php

This is from Milviz forum FAQ:
Quote
» Why can’t I register?
It is possible the website owner has banned your IP address or disallowed the username you are attempting to register. The website owner could have also disabled registration to prevent new visitors from signing up. Contact a board administrator for assistance.
« Last Edit: January 24, 2018, 08:04:06 AM by jeff3163 »

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

ualani

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 1,739
  • Legacy RTMM Library Manager
Re: Milviz Beaver Repaint N001MM...!?
« Reply #25 on: January 24, 2018, 08:54:11 AM »
All Milviz aircraft are 30% off at FSpilotshop until the end of the month.

Steve
Legacy RTMM Library Manager
Custom Objects Design
Legacy Scenery Design
Support


Dieter

  • Sr. Member
  • ****
  • Posts: 930
Re: Milviz Beaver Repaint N001MM...!?
« Reply #26 on: January 24, 2018, 10:34:00 AM »
Registering in MilViz-Forum:
Send an email to

kat@milviz.com

and send a request to get registered. That should work.
Many greetings
Dieter

Intel(r) Core(TM) i7-7700K CPU 4,5 GHz - MSI Nvidia GeForce GTX 1080 - RAM 16GB - 3 SSD je 500GB - 1 SSD 1TB - 1 HD 1TB - Win10 Pro 64 bit - MSFS Premium Deluxe - Thrustmaster Hotas Warthog - Thrustmaster TFRP Pedals

Penzoil3

  • Sr. Member
  • ****
  • Posts: 634
Re: Milviz Beaver Repaint N001MM...!?
« Reply #27 on: January 24, 2018, 11:31:23 AM »
 8)
 And you have to own the payware to get to the payware specific forum...
 Sue

Dieter

  • Sr. Member
  • ****
  • Posts: 930
Re: Milviz Beaver Repaint N001MM...!?
« Reply #28 on: January 24, 2018, 01:23:07 PM »
"""Product Purchase Not Needed To Join Forums!"""
https://milviz.com/forum/viewtopic.php?f=150&t=1086
Many greetings
Dieter

Intel(r) Core(TM) i7-7700K CPU 4,5 GHz - MSI Nvidia GeForce GTX 1080 - RAM 16GB - 3 SSD je 500GB - 1 SSD 1TB - 1 HD 1TB - Win10 Pro 64 bit - MSFS Premium Deluxe - Thrustmaster Hotas Warthog - Thrustmaster TFRP Pedals

simurq

  • Member
  • ***
  • Posts: 130
Re: Milviz Beaver Repaint N001MM...!?
« Reply #29 on: January 24, 2018, 03:14:33 PM »
Quote from: ualani
All Milviz aircraft are 30% off at FSpilotshop until the end of the month.

Thanks, Steve! That's why I wanted to buy and register at their forums.

Quote from: Dieter
Registering in MilViz-Forum:
Send an email to

kat@milviz.com

and send a request to get registered. That should work.

Thanks, Dieter! Wilco. ;)
Vüqar "Rustam" Quliyev