Author Topic: P3D v4 CTD in Tongass Fjords X  (Read 13522 times)

MTN1794

  • Jr. Member
  • **
  • Posts: 71
P3D v4 CTD in Tongass Fjords X
« on: August 22, 2017, 08:21:37 PM »
I installed Tongass Fjords X using online guidelines and it works great alongside the neighboring regions of ORBX too.  Flying the MILVIZ Beaver with tundra tires parked at PAFE (Kake) I notice that when I switched to the outside view and panned around it suddenly froze and CTD (crashed to disk).  I also had CTD when I flew over Kake.  This happened twice in each case when I double-checked to see if it would repeat itself.  When I approached Kake from Hydaburg (HYD) and landed this did not happen; but I stayed in the interior view on final.  Outside of Tongass Fjords X with this aircraft I have had no CTDs.  I have not added anything yet from Misty Moorings to see if I get a CTD also, but I wanted to add to the experience base for P3D v4. 

NeptuneP2V7

  • Sr. Member
  • ****
  • Posts: 967
    • VA-AMC
Re: P3D v4 CTD in Tongass Fjords X
« Reply #1 on: August 22, 2017, 09:21:59 PM »
Hi
follow this topic

have a nice day

Patrick
[size=16]Ryzen9 5900X 4.8 GHz / ASUS PRIME X570-P / Corsair Vengeance 32 Go DDR4 3600 MHz / ASROCK - VGA CARDS Radeon RX6800XT Phantom Gaming
Noctua NH-D15 / Samsung SSD 980 PRO M.2 PCIe NVMe 250 Go / Fox Spirit US-850G 80PLUS Gold / Fox Spirit 31.5" LED - PGM315 V2[/size]

stiletto2

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,341
Re: P3D v4 CTD in Tongass Fjords X
« Reply #2 on: August 22, 2017, 09:51:45 PM »
MTN1794

Patrick may have meant to say:  Have you read through this topic on the changes that need to be made to Tongass Fjords X to avoid CTDs?

The topic is here: http://forum.mistymoorings.com/index.php?topic=3463.0

Rod

YoYo

  • Jr. Member
  • **
  • Posts: 64
Re: P3D v4 CTD in Tongass Fjords X
« Reply #3 on: August 23, 2017, 08:28:27 AM »
Im using TF X in P3Dv4 from two weeks - every day and without any CTD but for sure I used new Rod's files for A.I.
Check this link and update textures for AI: planes and for Bell 206. Will be ok!
Webmaster of www.yoyosims.pl

NeptuneP2V7

  • Sr. Member
  • ****
  • Posts: 967
    • VA-AMC
Re: P3D v4 CTD in Tongass Fjords X
« Reply #4 on: August 23, 2017, 12:09:51 PM »
MTN1794

Patrick may have meant to say:  Have you read through this topic on the changes that need to be made to Tongass Fjords X to avoid CTDs?

The topic is here: http://forum.mistymoorings.com/index.php?topic=3463.0

Rod

Hi lol ! when i post i'v don't see ...... no paste the url

 ;)
thank Stielleto
[size=16]Ryzen9 5900X 4.8 GHz / ASUS PRIME X570-P / Corsair Vengeance 32 Go DDR4 3600 MHz / ASROCK - VGA CARDS Radeon RX6800XT Phantom Gaming
Noctua NH-D15 / Samsung SSD 980 PRO M.2 PCIe NVMe 250 Go / Fox Spirit US-850G 80PLUS Gold / Fox Spirit 31.5" LED - PGM315 V2[/size]

nbrich1

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,457
  • Misty Flying Club VA, Sim Troubleshooting & Help
    • Misty Flying Club (MFC)
Re: P3D v4 CTD in Tongass Fjords X
« Reply #5 on: August 23, 2017, 01:29:58 PM »
« Last Edit: November 22, 2017, 06:03:47 AM by nbrich1 »
Regards from Toronto, Canada. Home Airport CYYZ.
^----------------- Misty Flying Club -----------------^

MTN1794

  • Jr. Member
  • **
  • Posts: 71
Re: P3D v4 CTD in Tongass Fjords X
« Reply #6 on: August 24, 2017, 03:51:28 PM »
Thanks everyone.  I just deleted all 5 TFX AI in the aircraft folder and tested to see if the problem of CTD resolved itself - it did.  Worked great.  I reinstalled the 5 TFX AI back into the P3D v4 aircraft folder and it still worked - no CTD.  Hmm.  I think the unexpected result might be timetable related.  If the AI float plane that caused the CTD was not docked, I can see how this might happen.  I'll keep an eye open.

LouP

  • Jr. Member
  • **
  • Posts: 68
Re: P3D v4 CTD in Tongass Fjords X
« Reply #7 on: August 24, 2017, 06:10:44 PM »
You can get the ai planes back if you replace the model files and some textures.  I have all the ai running and no ctd.

LouP

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: P3D v4 CTD in Tongass Fjords X
« Reply #8 on: August 24, 2017, 08:34:45 PM »
Thanks everyone.  I just deleted all 5 TFX AI in the aircraft folder and tested to see if the problem of CTD resolved itself - it did.  Worked great.  I reinstalled the 5 TFX AI back into the P3D v4 aircraft folder and it still worked - no CTD.  Hmm.  I think the unexpected result might be timetable related.  If the AI float plane that caused the CTD was not docked, I can see how this might happen.  I'll keep an eye open.

     I am curious as to why you are doing this instead of following the instructions to fix your AI aircraft.  Of course the AI will crash the sim.  That is why Rod issued a fix for us to resolve the issue.  The solution was provided for you in the other thread, the link was provided to take you there. 
     So the question remains ... what are you doing?   ???

Please click on this link to download the fix.  (Please read and follow the included instructions)  ;)
https://www.dropbox.com/s/vtqaz6ajq2itf77/TFX%20SimObjects%20AI%20Update%20for%20P3Dv4%20V1.1%208-7-17.zip?dl=0

Thank you.
« Last Edit: August 24, 2017, 08:55:40 PM by jeff3163 »

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

MTN1794

  • Jr. Member
  • **
  • Posts: 71
Re: P3D v4 CTD in Tongass Fjords X
« Reply #9 on: August 28, 2017, 06:22:50 PM »
What am I doing?  I obviously missed the fix and link to it in the preceding.  Thanks for the reminder.

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: P3D v4 CTD in Tongass Fjords X
« Reply #10 on: August 28, 2017, 08:27:33 PM »
What am I doing?  I obviously missed the fix and link to it in the preceding.  Thanks for the reminder.

Cool.   8)  I didn't mean to sound harsh.  Sorry for that.  Glad you're on track now.   :)

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

LouP

  • Jr. Member
  • **
  • Posts: 68
Re: P3D v4 CTD in Tongass Fjords X
« Reply #11 on: August 29, 2017, 08:54:57 AM »
Yes, that's good.  It's nice to see the ai working in TF.

LouP

NeptuneP2V7

  • Sr. Member
  • ****
  • Posts: 967
    • VA-AMC
Re: P3D v4 CTD in Tongass Fjords X
« Reply #12 on: August 29, 2017, 05:18:12 PM »
Nice  ;)
[size=16]Ryzen9 5900X 4.8 GHz / ASUS PRIME X570-P / Corsair Vengeance 32 Go DDR4 3600 MHz / ASROCK - VGA CARDS Radeon RX6800XT Phantom Gaming
Noctua NH-D15 / Samsung SSD 980 PRO M.2 PCIe NVMe 250 Go / Fox Spirit US-850G 80PLUS Gold / Fox Spirit 31.5" LED - PGM315 V2[/size]

poppet

  • New Member
  • *
  • Posts: 18
Re: P3D v4 CTD in Tongass Fjords X
« Reply #13 on: November 22, 2017, 05:13:49 AM »
MTN1794

Patrick may have meant to say:  Have you read through this topic on the changes that need to be made to Tongass Fjords X to avoid CTDs?

The topic is here: http://forum.mistymoorings.com/index.php?topic=3463.0

Rod

Hello Rod

I would very much like to add this Information and a link to it into the Guide,  Is this Ok ?
Elaine Dixon

stiletto2

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 2,341
Re: P3D v4 CTD in Tongass Fjords X
« Reply #14 on: November 22, 2017, 01:04:07 PM »
Hi Elaine,

Sounds good.  Do it.

Rod