« previous next »
Pages: [1]

Author Topic: BWEP P001M Dispatch - Oil leak????  (Read 3595 times)

RCFlyer

  • Member
  • ***
  • Posts: 142
BWEP P001M Dispatch - Oil leak????
« on: December 02, 2016, 10:40:34 AM »
Have been flying P001M, oil leak, dispatch and have not been able to see the oil leak.  I have used the scenery checker and have verified that I can see the BWEP objects.  I have flown the route both ways multiple times, flying at less than 100 feet AGL down the middle of the pipeline service road, with an airspeed of around 35 knots.

I have used the Dispatch Selector to activate the P001M dispatch (it is listed in the green Active Dispatches section).  My flight sim is P3Dv3.4.  I have tried P002E and it works fine.

Any suggestions????

Regards,

Danny
« Last Edit: December 02, 2016, 02:45:40 PM by RCFlyer »
Logged

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: BWEP P001M Dispatch - Oil leak????
« Reply #1 on: December 02, 2016, 04:56:43 PM »
Do you have the latest edition of the BWEP Library?   ???
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

RCFlyer

  • Member
  • ***
  • Posts: 142
Re: BWEP P001M Dispatch - Oil leak????
« Reply #2 on: December 02, 2016, 05:05:14 PM »
Yes.  Flew the route again this morning with no luck.  Mostlikely something simple, just don't know what at this point.

Danny
Logged

RCFlyer

  • Member
  • ***
  • Posts: 142
Re: BWEP P001M Dispatch - Oil leak????
« Reply #3 on: December 03, 2016, 09:27:22 PM »
Loaded latest lib and it now works.  However I am now missing some function between pipeline sections.

Danny
Logged

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: BWEP P001M Dispatch - Oil leak????
« Reply #4 on: December 04, 2016, 03:23:32 AM »
Quote from: RCFlyer on December 03, 2016, 09:27:22 PM
Loaded latest lib and it now works.  However I am now missing some function between pipeline sections.

Danny

Hi Danny,
     Glad you got the leak fixed.  ;D  I can only guess what "missing some function between pipeline sections" means though.  Can you post pictures of your issue?  ???  Thanks.  :)
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

RCFlyer

  • Member
  • ***
  • Posts: 142
Re: BWEP P001M Dispatch - Oil leak????
« Reply #5 on: December 04, 2016, 10:43:23 AM »
I believe the missing files are "link" files.  A picture is attached.  I also ensured FreeMesh - NA was switched off.

Danny
« Last Edit: December 04, 2016, 01:37:52 PM by RCFlyer »
Logged

RCFlyer

  • Member
  • ***
  • Posts: 142
Re: BWEP P001M Dispatch - Oil leak????
« Reply #6 on: December 04, 2016, 08:38:19 PM »
Found the source of the issue.  The latest BWEP library file appears to have a mistake in the name of one of the files.  This file is:  FSXP3D BWEP PIPES_ANGLES.

The extension is listed as bg rather than bgl.  Once I changed the extension to bgl the angles were filled in.

Might want to check the latest library dated 12.02.16.

Regards,

Danny
Logged

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: BWEP P001M Dispatch - Oil leak????
« Reply #7 on: December 04, 2016, 10:51:31 PM »
Thanks!  I confirm the "L" is missing from that file in the latest BWEP Library zip file.   ;)
Logged

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

ualani

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 1,739
  • Legacy RTMM Library Manager
Re: BWEP P001M Dispatch - Oil leak????
« Reply #8 on: December 04, 2016, 11:36:46 PM »
My fault for the typo. I made a tweak to something and left of the "l". I'm sure Doug will fix it after he reads this. Thanks for pointing this out!

Steve
Logged
Legacy RTMM Library Manager
Custom Objects Design
Legacy Scenery Design
Support

nbrich1

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,481
  • Misty Flying Club VA, Sim Troubleshooting & Help
    • Misty Flying Club (MFC)
Re: BWEP P001M Dispatch - Oil leak????
« Reply #9 on: December 05, 2016, 07:55:06 AM »
Yup, that's all.. just rename FSXP3D BWEP PIPES_ANGLES.bg

to

FSXP3D BWEP PIPES_ANGLES.bgl and all is good.

Beautiful scenery packages guys: and even found P001M, P002E, P003M, P004S, and P005S so far..
P006E and P007S next!!.   A BWEP.csv in Dieter's Corner would be a great add for all the POI. .lol..

Norm
Logged
Regards from Toronto, Canada. Home Airport CYYZ.
^----------------- Misty Flying Club -----------------^
Pages: [1]
« previous next »