Author Topic: Flying Houses at Skagway  (Read 5381 times)

Doug

  • Misty Moorings Site Admin
  • Hero Member
  • *
  • Posts: 4,186
    • Return to Misty Moorings
Flying Houses at Skagway
« on: August 30, 2014, 02:35:48 PM »
It's not even deep winter when the tourists go away and the whiskey bottles come out from behind the couch ... and already, the houses are flying at Skagway! 

The pic below is with P3D V2.3.   My question is, Brad had a "flying houses fix" for FSX, would that work for P3D in this case?

Doug

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Flying Houses at Skagway
« Reply #1 on: August 30, 2014, 06:55:12 PM »
I don't see why not.  But I am checking it out anyway.  I am firing up P3D now.  I've noticed floating houses in the Puget Sound area around Seattle too.  ::)


EDIT:  I'm back.  The fix fits well in P3D, and I don't have any floating houses either.  It was already activated when I loaded in, so I had applied the fix before.  Probably when I installed PAGY into P3Dv2.  Yes, it works.  ;)
« Last Edit: August 30, 2014, 07:06:10 PM by jeff3163 »

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

Doug

  • Misty Moorings Site Admin
  • Hero Member
  • *
  • Posts: 4,186
    • Return to Misty Moorings
Re: Flying Houses at Skagway
« Reply #2 on: August 30, 2014, 08:40:40 PM »
Thank you Jeff

Doug


Dragnhorn

  • Sr. Member
  • ****
  • Posts: 751
  • "Ahhhhh..the smell of black powder in the morning"
Re: Flying Houses at Skagway
« Reply #3 on: September 04, 2014, 12:14:07 PM »
Pardon my ignorance, but the fix is?
Rob Abernathy
aka Dragnhorn

PC specs: 
Intel Quad Core i7 4790k Devil's Canyon (Haswell), 4.0 GHZ, /Gigabyte 87 UD4H 32 GB mother board, 16 GB DDR3 1866MHZ, Nvidia GTX 760 2 GB x 2 SLI, 2 TB 7200RPM HDD, Cpu Liquid Cooling Unit LVL 4, 750W Thermaltake, Windows 7 64 bit

jeff3163

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 4,103
  • Watercraft-Panels-Paint
Re: Flying Houses at Skagway
« Reply #4 on: September 04, 2014, 07:48:10 PM »
« Last Edit: September 04, 2014, 07:53:40 PM by jeff3163 »

Win10Pro64, MSFS 1.25.9.0, P3Dv4.3.29.25520, AMD Ryzen7 1800X@3.6 GHz , 32Gb RAM, GTX 1080 Ti, 2x42" Vizio Monitors, HTC Vive VR HMD, Saitek Yoke/Pedals/trim wheel, XBox360 Controller, G27 steering wheel w/shifter+pedals. :P

dexthom

  • Guest
Re: Flying Houses at Skagway
« Reply #5 on: September 06, 2014, 07:26:18 PM »
Sounds like a "Senior Moment".... ???

Dragnhorn

  • Sr. Member
  • ****
  • Posts: 751
  • "Ahhhhh..the smell of black powder in the morning"
Re: Flying Houses at Skagway
« Reply #6 on: September 07, 2014, 12:43:52 AM »
Slaps own forehead with palm of hand!  Too much ORBX testing these last months, esp with the Vector and Open LC programs.  I'm just getting a new PC up and running and installing all the Regions from ORBX to both FSX and P3D.  Finished the regions tonight and am ready for RTMM.  Boy, it'll be good to just fly low and slow and enjoy myself!

Yeah Dex, senior moment for sure.  Also I apologize for being lazy and not doing a search first.  lol
Rob Abernathy
aka Dragnhorn

PC specs: 
Intel Quad Core i7 4790k Devil's Canyon (Haswell), 4.0 GHZ, /Gigabyte 87 UD4H 32 GB mother board, 16 GB DDR3 1866MHZ, Nvidia GTX 760 2 GB x 2 SLI, 2 TB 7200RPM HDD, Cpu Liquid Cooling Unit LVL 4, 750W Thermaltake, Windows 7 64 bit

dexthom

  • Guest
Re: Flying Houses at Skagway
« Reply #7 on: September 07, 2014, 08:03:09 AM »
We are all part of that club... ;D

spud

  • Misty Moorings Team
  • Hero Member
  • *
  • Posts: 3,082
Re: Flying Houses at Skagway
« Reply #8 on: September 07, 2014, 09:39:32 AM »
Rob,
just look at it this way ... ya got Sept. 'brain fart' done early!
 ::)
 8)
Later,

Spud