Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - jeff3163

Pages: [1] 2 3 ... 7
1
Misty's Place / The (new) Air Hauler 2 thread
« on: July 11, 2018, 01:36:54 AM »
     Hello Misty flyers.  Welcome to the thread for discussions related to Air Hauler 2 in Return to Misty Moorings.  Share stories, tips, help, etc. with fellow AH2 pilots and get acquainted with your virtual shipping community.

     I have my base at Klawock, with terminals at Skagway and Telegraph Creek.  My company is 8 female pilots, flying DHC-2 Misty Moorings beavers.  My pilots are named after TV moms, like Shirley Partridge, Lucy Ricardo, Carol Brady, June Cleaver, Marion Cunningham, etc.  They keep my planes clean and smelling fresh.   ;D 


 :P

2
Misty's Place / Talkeetna Bush Pilot's story
« on: April 21, 2018, 07:55:27 PM »
     A video I found the other day.   :P  Let's see if I can "embed" it ...   :o :-\ :P :) :)



3
Misty's Place / Motherboard Failure :(
« on: March 21, 2018, 01:20:17 AM »
     On Sunday my motherboard lost it's bootloader image, and that caused a black bios screen and my system's OS boot record disappeared.  This was sudden and unexpected, during a routine rebooting.  I've had to go back to my previous motherboard, an AM3 type.  I was forced to reinstall windows, and am now in the process of brain-salad surgery getting things functional again.  People, WRITE DOWN YOUR PASSWORDS SOMEWHERE, and REMEMBER WHERE YOU PUT THEM!!!  I was not prepared with passwords or windows key etc., so had to hack my way in with a dull spoon.   :'(   Anyway, I am obviously logged into my account now, so yay for that.  Computer is barely functional, as I am still stitching things up.  I have no sound or microphone, so not much fun yet.   

4
Screenshots / Morning Swim
« on: November 23, 2017, 02:04:35 AM »
Heading out in the CIRP Stalwart for a trip out to the Through Glacier station.  I caught this reflection in the early morning water.   8)


5
General Discussion / Poll: Shockwave lights REDUX, by A2A
« on: November 14, 2017, 08:34:16 AM »
Poll


Hi folks,
     I'd like to use Shockwave lights as an option in some of our RTMM models, if you've got them.  Do you?  ???
What I want to know is ...

Do you own the A2A Shockwave REDUX lights?
 8) http://www.a2asimulations.com/store/shockwavelights/  8)

Thanks!   8)
Off, Panel Lights, Stock Headlamps, Off, Shockwave Panel Lights, Shockwave Headlamps, side view, 3/4 rear view. (view in slideshow mode)

6
Screenshots / Misty's Place (10/8/2017)
« on: October 08, 2017, 09:06:19 PM »
Doug did some upgrades to Misty's Place for Prepar3d v4, and asked me to "take a look".  So I did, and I took pictures, of course.  (I just taxied to the runway and took off, then landed again.)  ;)

 

 8) ::) ::) ::) ::) ::) ::) ::) 8) :)

7
Prepar3D-Version 4 / Airport Design Editor 1.75 for P3Dv4
« on: September 25, 2017, 10:04:34 PM »
     A new version (v1.75) of Airport Design Editor is available from Scruffyduck.

Download page -->http://www.scruffyduck.org/downloads/4584110854

     Jon from Scruffyduck says:
Quote
We have just released ADE version 1.75.  This version supports Prepar3D v4.  One of the ongoing 'issues' with ADE updates is that we release major new versions as a full installer.  Minor updates are delivered via the online updater.  The reason we do it this way is because a major upgrade often involves a lot of new files and the size becomes too large for the online updater.  It isn't possible with the updater we use to signal a new full installer.

This leads to the situation where users of older versions may not realise that there is a newer version.  Checking for updates tells you that you are up to date.  We are looking at ways to make announcements via ADE outside the online updater when a new major version is released.

We understand that for some folks their current version works well and does everything they need.  Newer versions may contain functionality that is of no interest.  And if it works for you that is fine of course.  Generally though we are only able to support the current production version with fixes.

Meantime I would be interested in hearing from you which version you are currently using.  Perhaps you could spare the time to email me with that information. 

Thanks for taking the time to read this


Jon
ScruffyDuck Software

8
Misty's Place / Around the World in 80 Days with Aerosoft
« on: September 25, 2017, 09:53:12 PM »
E-mail to members of Aerosoft forum: (I believe it's OK to share this with everyone.)

Quote
Hi jeff3163,
Hi there, we do not send out of a lot of emails from the forum (and of course only when you allowed us to do so) but we wanted to let you know of a long trip that will soon start.

Phileas Fogg started on 2 October 1872 for his famous circumnavigation and we have decided to fly his route on the correct dates this year. Anybody can join us in this exiting trip. You can make your life as hard as you like or just use a big airliner with a lot of range. I'm silly and will use a PBY Catalina so I will need to plan my route carefully. It's not a race, it's a community event where we hope that you will share your adventure.

You will find the rule book here: http://forum.aerosoft.com/index.php?/forum/837-the-rules-and-official-messages/

You will find the users diaries here: http://forum.aerosoft.com/index.php?/forum/841-diaries/

 

Please consider joining us!

     Here is an opportunity to join in an epic journey.  ;)

9
Screenshots / Tipella Iceberg
« on: April 28, 2017, 11:08:56 PM »
In search of the famous ...

 "Tipella Iceberg" ...  ;D

Flying the newly rediscovered Tipella mountain flying package by Lysander.
Link to "Stray BGL" thread discussing this scenery:
http://forum.mistymoorings.com/index.php?topic=3417.0


Taking off from Tipella ....  I took a few shots along the way.



No Iceberg!  Whaaa ...  :o   :P   :-[   :)

10
Misty's Place / The power is out!
« on: January 10, 2017, 11:20:55 PM »
 :o

We are having severe wind storms in my area right now.  The power went out about an hour and a half ago.  We sat in the dark and waited.  The power has just come back on and I checked my email.  My power company sent me an email to inform me that the power is out!  I could rest assured that they were on the problem and would have the power back on soon.  I broke out in laughter and had to share.   ;D

11
Help and Troubleshooting / SCE requires Java 1.5.0 to run. Help, please.
« on: August 30, 2016, 01:22:12 AM »
     I am having issues with my Scenery Config Editor lately.  It won't start.  It pops up a message that it requires Java version 1.5.0.  That is strange, because Java updates itself frequently and is now up to version 8 update 102 or v1.8.0_102.  I can't get a hold of an older 1.5.0 version of Java.  Well, I could if I register with Oracle first.  But they want me to give them my work number, job title, and name of the place I work at.  That doesn't set right with me, so I didn't give it to them.  (they will give it out to third parties if they wish).  I think they want to know if I am a developer or IT professional, etc.

     Anyway, is anyone else having this issue?  I update SCE to version 1.1.7, but that didn't fix it either. 

EDIT:  I've learned that SCE is having issues with the latest Java update.  I've rolled back to a version I had archived on my storage drive.  I am now able to open SCE and use it again.  Yea!! 

     Is anyone else experiencing this issue?  ???

12
Misty's Place / Springtime in Alaska
« on: March 24, 2016, 08:44:02 PM »
 :)  Springtime in Alaska!  Enjoy!  8)

https://youtu.be/LtsHDcxZlx0
Johnny Horton

13
Misty's Place / ScruffyDuck software updates
« on: February 06, 2016, 04:06:12 PM »
Hi all,
     Scruffyduck software has issued some updates today.  Airport Design Editor version 1.67.5684 is now available, as well as a new version of the Simple Airport Scanner tool.  They are now P3Dv3 compatible and there are other tweaks and fixes included in the ADE package.  So if you are a developer of airports, or just like to mess with/fix the ones you've got, head on over to the Scruffyduck site to get your copy.   ;)

Jon Masterson (aka Scruffyduck) is also offering a BETA version (1.67.5876) to test a new concept in accurate library object footprints.  If you're interested in participating in this (not FS9 compatible, sorry) then follow this link to learn more ...

http://www.fsdeveloper.com/forum/threads/ade-1-67-5876-beta-accurate-library-object-footprints.436358/

14
Website Discussion / Double e-mail notifications
« on: January 10, 2016, 11:12:59 PM »
Hi Dan,
     Lately, every time I am e-notified of a post to a thread I am watching, I get a duplicate also.  :o  Are you in control of this aspect?  Thanks.   8)

15
The Moorings - On the Water / Sea Legs
« on: September 12, 2015, 10:50:51 PM »
Hello Misty boaters,
     I've taken the HMS Bounty for a cruise.  I wanted to learn about this incredible model, and how to use it correctly.  A lengthy trip was in order.  I started out on the 9th of September from Roche Harbor. 
     I had just installed the AI World Shipping package, so I was anxious to see some large vessels along the way.  I've also heard that the HMS Bounty is also out there as an AI ship.  It would be so cool to see one of them.  I don't know where they sail at though.  I took some pics along the way from Roche Harbor to Tofino.


Pages: [1] 2 3 ... 7